RCCrawler Forums

Cloak · 06-03-2007, 08:17 PM

I had an e-maxx I converted to brushless sometime last year. I decided I really prefer an E-Revo for its suspension, so I yanked the insides (single speed tranny, Feigao 8xl and Schultze esc) and put them in my 2.5 revo.

I haven't secured down anything, or made a battery bracket yet, but I wanted to see if it works. Thus I give you a short video. Not too bad I think.

Right click, save as!
http://cloak.ws/rc/e-revo/erevo_test1.mpg

I think I'm going to chase this truck down the road on its lid as well.

ON THE FARM · 06-03-2007, 08:22 PM

the link dont work.

Cloak · 06-03-2007, 08:24 PM

Sure it does, right click, save as.

Unholy · 06-03-2007, 08:25 PM

Works for me!

JohnRobHolmes · 06-03-2007, 08:39 PM

Pretty cool! thats the same as I was planning, but I sold the revo roller to Jason to fund another project.

Cloak · 06-03-2007, 08:42 PM

The worst thing about it is the e-maxx kind of sucked because it pulled wheelies at any speed. It is really hard to even get the truck up to full speed to get a proper speed run test. Usually I ran out of space first.

I'm guessing this E-Revo will be more of the same. I'm willing to put time into dialing this one in though.

Probably a wing and/or wheelie bar in the near future.

Crawler Noob · 06-03-2007, 08:57 PM

nice, the erevo conversion is to popular now adays , i like being one of the OG's for the conversions.

06-03-2007, 08:17 PM	#1
Cloak I wanna be Dave Join Date: Jan 2006 Location: Albuquerque Posts: 2,206	E-revo conversion I had an e-maxx I converted to brushless sometime last year. I decided I really prefer an E-Revo for its suspension, so I yanked the insides (single speed tranny, Feigao 8xl and Schultze esc) and put them in my 2.5 revo. I haven't secured down anything, or made a battery bracket yet, but I wanted to see if it works. Thus I give you a short video. Not too bad I think. Right click, save as! http://cloak.ws/rc/e-revo/erevo_test1.mpg I think I'm going to chase this truck down the road on its lid as well. Last edited by Cloak; 06-03-2007 at 08:23 PM.

06-03-2007, 08:22 PM	#2
ON THE FARM Quarry Creeper Join Date: Aug 2006 Location: NORTH TEXAS Posts: 202	the link dont work.

06-03-2007, 08:24 PM	#3
Cloak I wanna be Dave Join Date: Jan 2006 Location: Albuquerque Posts: 2,206	Sure it does, right click, save as.

06-03-2007, 08:25 PM	#4
Unholy I wanna be Dave Join Date: Mar 2006 Location: One Legend. Posts: 2,134	Works for me!

06-03-2007, 08:39 PM	#5
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	Pretty cool! thats the same as I was planning, but I sold the revo roller to Jason to fund another project.

06-03-2007, 08:42 PM	#6
Cloak I wanna be Dave Join Date: Jan 2006 Location: Albuquerque Posts: 2,206	The worst thing about it is the e-maxx kind of sucked because it pulled wheelies at any speed. It is really hard to even get the truck up to full speed to get a proper speed run test. Usually I ran out of space first. I'm guessing this E-Revo will be more of the same. I'm willing to put time into dialing this one in though. Probably a wing and/or wheelie bar in the near future.

06-03-2007, 08:57 PM	#7
Crawler Noob Quarry Creeper Join Date: Jan 2006 Location: Atlanta GA Posts: 387	nice, the erevo conversion is to popular now adays , i like being one of the OG's for the conversions.

Sponsored Links

RCCrawler Forums

Thread: E-revo conversion