RCCrawler Forums

5150 Krawlers · 01-03-2008, 04:45 PM

upon further inspection the skid wasnt wood, it is some kind of chinsy Azz foam

braceysdad · 01-03-2008, 04:46 PM

Quote:

Originally Posted by Coligny

Next they will ask you to come and pick it up in Niger

What did you call me?

5150 Krawlers · 01-03-2008, 04:50 PM

and screws that are different lengths to hold the skid on

good quality

Krawlin · 01-03-2008, 04:51 PM

Quote:

Originally Posted by 85toykrawler

Got my chassis today, I need a mod to move this to the feedback section, I must say that I am fully pi$$ed off, Im gonna let the cat out of the bag, the vendor was clodstall.

None of the leaf mounts were drilled and tapped out for my jugg leaves like they were suppose to be, and I get a Fu(king skid plate that is made from a piece of wood

Are you fu(king joking me, I will break a chinsy wood skid tranny mount in about 5 seconds and what happens when it gets wet?

I wait 3 extra weeks because you broke your tap, and then I get a chassis that is not what I paid for with a wood skid

thanks TONY

sincerely
-Dennis

This does not suprise me, as there was a thread recently of someone running over a chassis that clodstall made for them... it was not even straight! And a wood skid? Wow, that is some quality work there.... NOT! This should be a good note to those about to buy from this clodstall guy... from the information I gather.... IT'S OBVIOUS THAT NO ONE SHOULD BE SENDING THIS GUY ANY MONEY ANYMORE. Sorry to the mods if I violated any rules by saying the above. 85toykrawler, I would for sure try to get a refund.

Quote:

Originally Posted by braceysdad

What did you call me?

I believe he was reffering to the name of a country...

5150 Krawlers · 01-03-2008, 04:53 PM

and it wasnt even the same design that I asked for at all

draven · 01-03-2008, 05:03 PM

Man this SUCKS I am so sick of dishonest people on here for the most part everyone is great but than someone like this makes ya Think twice before sending money for something Hope it all works out

5150 Krawlers · 01-03-2008, 05:10 PM

heres a pic of how straight the skid plate is the item its sitting on is 100% level

, and the holes dont match up either

slobin3d · 01-03-2008, 05:10 PM

You have any pics of the skid?

5150 Krawlers · 01-03-2008, 05:11 PM

heres one ^^^

slobin3d · 01-03-2008, 05:16 PM

missed that

That looks like hacked up cutting board

5150 Krawlers · 01-03-2008, 05:18 PM

its not good enough quality to be a cutting board, its foam

hawnmt · 01-03-2008, 05:26 PM

Quote:

Originally Posted by 85toykrawler

its not good enough quality to be a cutting board, its foam

Damn, there's something you never expect to hear. Sorry man, I hope Clodstall gets his personal life straight then makes this and his other bad deals, right.

Robb · 01-03-2008, 06:48 PM

Got a pic of the rest of the rig?

His excuse before was basically that he never claimed to be a pro at making these things, and that was why he sold his crap so cheap. But, if you paid $90, he is out of the "low cost chassis" class, and for that kind of dough, you should expect a quality product.......................which by the looks of that skid plate, you didn't get.

5150 Krawlers · 01-03-2008, 06:56 PM

I just finished assembling it, none of the hardware for the crossmembers were tapped very well, I ended up stripping two of the holes out, once again the hardware for the crossmembers was of assorted length:-(

I am not going to use this chassis at all for my scale project, so once again that build is on hold

who wants to see the old 85 toyota run it over?:-P

dirk379 · 01-03-2008, 06:58 PM

Yeah why do people buy from him?

Honestly... It's hand made work, i would only pay a few people to hand make me anything. And i wouldn't pay them until i saw my finished product.

How does he live with himself by sending all these products out this way?

5150 Krawlers · 01-03-2008, 06:59 PM

savageracer312 · 01-03-2008, 07:10 PM

hahaa it looks as if that skidplate is made out of soap,lol i could make a better quaility chassis than that and i havent built a sucessful one yet, allways and i mean ALLWAYS make better quality for others than yourself!

JeremyH · 01-03-2008, 07:15 PM

That does look like pretty bad work...

How do the chassis side plates line up to one another? Got any shots of them side by side?

5150 Krawlers · 01-03-2008, 07:15 PM

plates line up good

JeremyH · 01-03-2008, 07:17 PM

Humm...then you should be able to fab up a new skid that will make them work well. Time to head to Ikea for a cutting board!

01-03-2008, 04:50 PM	#23
5150 Krawlers Quarry Creeper Join Date: Dec 2006 Location: Bozeman Posts: 228	and screws that are different lengths to hold the skid ongood quality

01-03-2008, 05:10 PM	#27
5150 Krawlers Quarry Creeper Join Date: Dec 2006 Location: Bozeman Posts: 228	heres a pic of how straight the skid plate is the item its sitting on is 100% level, and the holes dont match up either

01-03-2008, 04:45 PM	#21
5150 Krawlers Quarry Creeper Join Date: Dec 2006 Location: Bozeman Posts: 228	upon further inspection the skid wasnt wood, it is some kind of chinsy Azz foam

01-03-2008, 04:53 PM	#25
5150 Krawlers Quarry Creeper Join Date: Dec 2006 Location: Bozeman Posts: 228	and it wasnt even the same design that I asked for at all

01-03-2008, 05:03 PM	#26
draven Quarry Creeper Join Date: Jan 2007 Location: 2 miles from nowhere MO. Posts: 372	Man this SUCKS I am so sick of dishonest people on here for the most part everyone is great but than someone like this makes ya Think twice before sending money for something Hope it all works out

01-03-2008, 05:10 PM	#28
slobin3d I'm a stupid C U N T! Join Date: Jun 2005 Location: In the Garage! Posts: 4,307	You have any pics of the skid?

01-03-2008, 05:11 PM	#29
5150 Krawlers Quarry Creeper Join Date: Dec 2006 Location: Bozeman Posts: 228	heres one ^^^

01-03-2008, 05:16 PM	#30
slobin3d I'm a stupid C U N T! Join Date: Jun 2005 Location: In the Garage! Posts: 4,307	missed that That looks like hacked up cutting board

01-03-2008, 05:18 PM	#31
5150 Krawlers Quarry Creeper Join Date: Dec 2006 Location: Bozeman Posts: 228	its not good enough quality to be a cutting board, its foam

01-03-2008, 06:48 PM	#33
Robb RCC Addict Join Date: Aug 2005 Location: VARCOR Posts: 1,826	Got a pic of the rest of the rig? His excuse before was basically that he never claimed to be a pro at making these things, and that was why he sold his crap so cheap. But, if you paid $90, he is out of the "low cost chassis" class, and for that kind of dough, you should expect a quality product.......................which by the looks of that skid plate, you didn't get.

01-03-2008, 06:56 PM	#34
5150 Krawlers Quarry Creeper Join Date: Dec 2006 Location: Bozeman Posts: 228	I just finished assembling it, none of the hardware for the crossmembers were tapped very well, I ended up stripping two of the holes out, once again the hardware for the crossmembers was of assorted length:-( I am not going to use this chassis at all for my scale project, so once again that build is on hold who wants to see the old 85 toyota run it over?:-P

01-03-2008, 06:58 PM	#35
dirk379 RCC Addict Join Date: Nov 2005 Location: Utah Posts: 1,530	Yeah why do people buy from him? Honestly... It's hand made work, i would only pay a few people to hand make me anything. And i wouldn't pay them until i saw my finished product. How does he live with himself by sending all these products out this way?

Sponsored Links

01-03-2008, 06:59 PM	#36
5150 Krawlers Quarry Creeper Join Date: Dec 2006 Location: Bozeman Posts: 228

01-03-2008, 07:10 PM	#37
savageracer312 Pebble Pounder Join Date: Nov 2005 Location: Viva Your Mom!! Posts: 167	hahaa it looks as if that skidplate is made out of soap,lol i could make a better quaility chassis than that and i havent built a sucessful one yet, allways and i mean ALLWAYS make better quality for others than yourself!

01-03-2008, 07:15 PM	#38
JeremyH I wanna be Dave Join Date: Sep 2005 Location: Houston, TX Posts: 16,952	That does look like pretty bad work... How do the chassis side plates line up to one another? Got any shots of them side by side?

01-03-2008, 07:17 PM	#40
JeremyH I wanna be Dave Join Date: Sep 2005 Location: Houston, TX Posts: 16,952	Humm...then you should be able to fab up a new skid that will make them work well. Time to head to Ikea for a cutting board!

RCCrawler Forums

Thread: Your thoughts