|
| LinkBack | Thread Tools | Display Modes |
12-05-2009, 01:41 PM | #1 |
Rock Crawler Join Date: Jan 2009 Location: crawlorado
Posts: 555
| building a berg......need ideas.....
so im building up a berg and need to know what the reg for motors is? im running a 45 in my shafty and would like it to be at least as quick as that....any ideas?......1350 40/20 7.4 lipo single esc.........i realize it will be tune to taste but i need a starting point..... |
Sponsored Links | |
12-05-2009, 01:53 PM | #2 |
TEAM MODERATOR Join Date: May 2004 Location: Tennessee
Posts: 10,855
|
35t's with 12 tooth pinions on a 3 cell is a good set up. Good low end with a decent amount of wheel speed. I used to run that. I'm now running 35t's withy 13t pinions....like it better. 45t's in a Berg would work,but I think you'd need around a 14 or 15t pinion to get any wheel speed. It is personal preference. A guy could get another 45t and order 4 or 5 different pinion sizes and adjust it to your taste. Pinions are cheaper than motors |
12-05-2009, 02:56 PM | #3 |
Pebble Pounder Join Date: Apr 2004 Location: Aurora
Posts: 125
|
I run Holmes Hobbies handwound 30Ts on 3cell lipos. Some may say I have too much wheel speed but I like it and it suits my style |
12-07-2009, 03:13 PM | #4 |
Rock Crawler Join Date: Jan 2009 Location: crawlorado
Posts: 555
|
i do beleive i will be running a tracer with a novak m2dig 3s and a bug body.....
|
Thread Tools | |
Display Modes | |
| |