Looking for local help

[James003]

hey crawleradians, I just bought a dx3r recently. I have an axial with a dna dig. when i was running my dx3e i could use 2p for 4wd and dig and 3p for 4wd, free, dig. My problem is that now that I have the 3r my 3p works great but the 2p won't do the 4wd and dig. it only does 4wd and free, or if I reverse it it'll do free and dig. I've messed with this for hours and can't get it right. I'm convinced that if my 3e could do it than my 3r should as well.

so i'm hoping that maybe someone here in Colorado has been through this issue and would be willing to take a few minutes with me in person and show me how do set this up. i'll be at rch comp on friday(hopefully) and am planning on going to palmer for finishlines comp. or I'd be happy to come to you if anyone will help me.

i've posted questions on here and all the advice i'm getting doesn't work but nobody has told me this isn't possible so it's gotta be me doing something wrong.

thanks

[Rubbaneck]

You can only choose 2p or 3p not both. I know what you mean by scrolling through the menu and notice the option for 2p or 3p. You'll have to set the 3p and use freewheel as the center location on the servo, forward is 4wd and all the way back is dig.

Or 2p, 4wd then dig.

I've tried for hours too and that option of having both wont work. :-(

[James003]

ok, that's messed up that a basic dx3e can do it but the dx3r can't.

[James003]

found some help.....thanks Cato. And you too David