RCCrawler Forums

poorboyrc77 · 10-22-2009, 02:50 PM

Quote:

Originally Posted by Rockcrawler

Its for everyone in state that does not judge.

Done.

I'll pay mine then. I stupidly volunteered to judge at Southern cup & missed watching everyone comp. Didn't get to see You or Austin drive except for the course I was helping judge. Meeting CRSMacgyver/ Andy & helping him judge was the best thing from the whole day for me. & I know your joking

TRACE · 10-22-2009, 03:34 PM

Quote:

Originally Posted by Rockcrawler

Ok AL guys, if we dont get more judges to step up and help, I am going to start pulling names off the list.

I have done this long enough with little help but from a few people. Its time for some of you other guys to step up.

Quote:

Originally Posted by Rockcrawler

Good job AL guys. 2 out of 6 judges.

Post #6 In this thread

Quote:

Originally Posted by TRACE

I will be there and I will help out in any way

In any way includes being a judge

TRACE · 10-22-2009, 03:38 PM

Quote:

Originally Posted by Benzbuildr

I got a scaler, can I drive it?

Might have to get pulled out a lot

Got it coverd

TRACE · 10-22-2009, 03:41 PM

Quote:

Originally Posted by alabamaman

Up to 47 drivers for the 2.2 class.

Did I forget to mention there is a $10 per class fee?

ThaT is for OUT of state entries is'nt it ?

Just if your from tenn. and your last name is dill

Colby · 10-22-2009, 03:43 PM

Trace, what system are you running in your slash? I will have my rc10T3 with Sidewinder and 5700kv motor. Dunno on the battery yet, but i think we should drag race

TRACE · 10-22-2009, 03:44 PM

Quote:

Originally Posted by ColbyTheKid

Trace, what system are you running in your slash? I will have my rc10T3 with Sidewinder and 5700kv motor. Dunno on the battery yet, but i think we should drag race

You got money

Rockcrawler · 10-22-2009, 03:48 PM

Quote:

Originally Posted by TRACE

Post #6 In this thread

In any way includes being a judge

I will put you down too then.

I didnt want to just start throwing peoples name down as judging just because they say "I will help".

Colby · 10-22-2009, 04:49 PM

Quote:

Originally Posted by TRACE

You got money

Haha! Pink slips!!! Nah just kidding, I just want to see how fast it is compared to yours, and bash around a little bit

sddill · 10-22-2009, 05:23 PM

Tires are restricted to a height and width only. Tires shall not exceed 4.75" in height and 1.75" in width. 1.9" or 2.2" wheels are allowed. No restrictions on tire manufacturer.

This rule is going to be hard to follow for the 2.2 scalers :? I have no 2.2's that are only 1.75 " wide.. Can we bump this up to 2.25" ???? I hate to have to make or buy tires just for this comp...

sddill · 10-22-2009, 05:28 PM

Quote:

Originally Posted by TRACE

Just if your from tenn. and your last name is dill

Hey Trace

Rockcrawler · 10-22-2009, 06:11 PM

Quote:

Originally Posted by sddill

Tires are restricted to a height and width only. Tires shall not exceed 4.75" in height and 1.75" in width. 1.9" or 2.2" wheels are allowed. No restrictions on tire manufacturer.

This rule is going to be hard to follow for the 2.2 scalers :? I have no 2.2's that are only 1.75 " wide.. Can we bump this up to 2.25" ???? I hate to have to make or buy tires just for this comp...

This will be our first scale comp, we are not going to be strict on any rules. Just dont bring an ax10 with a truck body.

TEDROCKZ · 10-22-2009, 06:36 PM

Quote:

Originally Posted by Rockcrawler

This will be our first scale comp, we are not going to be strict on any rules. Just dont bring an ax10 with a truck body.

What about a berg with a truck body

Thrashing on the FJ thingy trying to get it ready for the Turkey Crawl
Name: 002.JPG
Views: 297
Size: 66.0 KB

Colby · 10-22-2009, 09:07 PM

Dern, looks like you got some work to do!!! Do work builder!

rednck21 · 10-22-2009, 09:18 PM

Quote:

Originally Posted by billy_06evoix

Maybe they changed them, huh?

I know when I bought mine less than two months ago they said 4.9" tall. They may of just had it mixed up?

possibly. I measured mine earlier and they are just a hair under 4.5" mounted on a axial beadlock

Quote:

Originally Posted by TRACE

Got it coverd

when did you and your brother build scalers?????

Quote:

Originally Posted by sddill

Tires are restricted to a height and width only. Tires shall not exceed 4.75" in height and 1.75" in width. 1.9" or 2.2" wheels are allowed. No restrictions on tire manufacturer.

This rule is going to be hard to follow for the 2.2 scalers :? I have no 2.2's that are only 1.75 " wide.. Can we bump this up to 2.25" ???? I hate to have to make or buy tires just for this comp...

2.2 isnt scale

Quote:

Originally Posted by Rockcrawler

This will be our first scale comp, we are not going to be strict on any rules. Just dont bring an ax10 with a truck body.

Yea, those were just some basic rules i wrote awhile back to get everyone going. the width can be changed. there was two different sets of rules and i combined them into what they are now. maybe fishy or ryan will remember which two they were??

since theres no wheel size limit....It was set up to allow the guys with 2.2's to run in the scale class....BUT....at the same time kept someone from using say.. a losi claw in the scale class which are about 5" and would be a huge advantage. get it now??

(this applies to sddills post above)

Quote:

Originally Posted by TEDROCKZ

What about a berg with a truck body

Thrashing on the FJ thingy trying to get it ready for the Turkey Crawl

that thing is going to be sweet!!

cant wait to see it...

Rockcrawler · 10-22-2009, 09:31 PM

Yeah, I agree. While this will be a more or less, open class, dont be ridiculous on trying to run a comp tire or anything. If you are unsure of your rig, post a pic.

Lushtrucker · 10-22-2009, 10:42 PM

Scattman and I are planning on doing some night runs with the scalers on Friday night.
Anyone else interested?
Say 6 or 7ish

Benzbuildr · 10-23-2009, 06:57 AM

Quote:

Originally Posted by TEDROCKZ

What about a berg with a truck body

Thrashing on the FJ thingy trying to get it ready for the Turkey Crawl
Attachment 114985

I'm trying to get my SC8e scaler running by then.

sddill · 10-23-2009, 07:30 AM

1. Rockcrawler........2.2............SCALE

7. Trace................2.2....1.9....SCALE

24.sddill.................2.2....1.9....2.2 SCALE The only true scalers

This is cool..I get to beat Jeff twice in one day and Trace 3 times

Rockcrawler · 10-23-2009, 02:43 PM

Quote:

Originally Posted by sddill

1. Rockcrawler........2.2............SCALE

7. Trace................2.2....1.9....SCALE

24.sddill.................2.2....1.9....2.2 SCALE The only true scalers

This is cool..I get to beat Jeff twice in one day and Trace 3 times

We will see about that.

Rockcrawler · 10-23-2009, 02:44 PM

Quote:

Originally Posted by sddill

1. Rockcrawler........2.2............SCALE

7. Trace................2.2....1.9....SCALE

24.sddill.................2.2....1.9....2.2 SCALE The only true scalers

This is cool..I get to beat Jeff twice in one day and Trace 3 times

Oh yeah, out of 48 names, you could only pick out 3 that you could beat?

10-23-2009, 07:30 AM	#218
sddill RCC Addict Join Date: Nov 2007 Location: E.T.R.C. Posts: 1,575	1. Rockcrawler........2.2............SCALE 7. Trace................2.2....1.9....SCALE 24.sddill.................2.2....1.9....2.2 SCALE The only true scalers This is cool..I get to beat Jeff twice in one day and Trace 3 times Last edited by sddill; 10-23-2009 at 07:32 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-22-2009, 03:43 PM	#205
Colby WOOPOOW!! Join Date: Nov 2008 Location: Atlanta, GA Posts: 4,218	Trace, what system are you running in your slash? I will have my rc10T3 with Sidewinder and 5700kv motor. Dunno on the battery yet, but i think we should drag race

10-22-2009, 05:23 PM	#209
sddill RCC Addict Join Date: Nov 2007 Location: E.T.R.C. Posts: 1,575	Tires are restricted to a height and width only. Tires shall not exceed 4.75" in height and 1.75" in width. 1.9" or 2.2" wheels are allowed. No restrictions on tire manufacturer. This rule is going to be hard to follow for the 2.2 scalers :? I have no 2.2's that are only 1.75 " wide.. Can we bump this up to 2.25" ???? I hate to have to make or buy tires just for this comp...

10-22-2009, 09:07 PM	#213
Colby WOOPOOW!! Join Date: Nov 2008 Location: Atlanta, GA Posts: 4,218	Dern, looks like you got some work to do!!! Do work builder!

10-22-2009, 09:31 PM	#215
Rockcrawler I wanna be Dave Join Date: Jan 2005 Location: Hueytown, Alabama Posts: 6,777	Yeah, I agree. While this will be a more or less, open class, dont be ridiculous on trying to run a comp tire or anything. If you are unsure of your rig, post a pic.

10-22-2009, 10:42 PM	#216
Lushtrucker Rock Crawler Join Date: Jan 2008 Location: Knoxville Posts: 555	Scattman and I are planning on doing some night runs with the scalers on Friday night. Anyone else interested? Say 6 or 7ish

Sponsored Links

RCCrawler Forums

Thread: Vanquish Products - ALRC Turkey Crawl - Nov.14