AXIALFEST - JUNE 22-24th, 2012 - Cisco Grove, California

[Skeeno]

4 months to go.....any updates?

[zonkerd]

I dont know anything just res my camp spot....

[Rig Rocker]

I was wondering that too. I'd like to have a little bit of info on what to expect, and what to bring. I know to bring Axial's, but that's a little vague.

What I would REALLY like to know is if there will be a G6 this year at Axialfest like last year at AWCC? That will change my plans so I would really like to know that now before I book a campsite and get arrangements ready for friends 5th wheel.

[Skeeno]

You're not gonna sleep in your car again?

[Jrob]

Originally Posted by zonkerd

I dont know anything just res my camp spot....

what spots did you reserve? it would be good to be close to some familar faces

[Rig Rocker]

Originally Posted by Skeeno

You're not gonna sleep in your car again?

That was my buddy Dan sleeping in the rental impala . We had the camp spot, but also a room in the motel for a week. My wife and I took a 7 day vacation last june, and we centered it around the AWCC

[GCRad1]

Axial R/C Inc. is proud to announce OLIVER KNIVES will be joining us again as Official Technical Partner of AXIALFEST 2012!


Dwane Oliver, head of Northern New Mexico Rock Crawling RC Club and chapter member of RECON Crawlers, is also a custom knife maker! Oliver Knives will once again graciously hand-making something special for AXIALFEST 2012 at Cisco Grove, CA.

Last year, three first place winners received hand made G6 SK Oliver Knives.

For AXIALFEST 2012 Dwane will be making FIVE KNIVES!!
1: G6 Camp Combo ( Hatchet and G6-SK )
2: G6-BSK’s ( Big Survival Knife 4″ blade )
2: G6-SK’s ( Survival Knife 3″ blade)

ABOUT OLIVER KNIVES / Dwane Oliver
Custom knife maker since 2004. As many people do, I enjoy a good knife, only problem was I couldn’t afford one. My solution, learn to make knives. I learned a lot from the Internet, a wonderful tool for learning! I began making custom handmade knives in 2004. I do not use grinding jigs or CNC machines, these knives are all hand-made and shaped. I have sold knives all over the United States, Ireland, England and Australia. Several knives went to Iraq with my sons, who are in the Marine Corps.

As with all of my knives, the G6 SK (G6 denotes the RECON G6 Challenge and SK denotes Survival Knife) is made to stand the test of time. The High Carbon 1095 Steel is precision ground (by my 2 hands) to a rugged size with a durable edge. The handle on a G6 SK are chosen for their durability in any condition, wet or dry, hot or cold. Handles are always textured to give maximum grip, even in slippery situations. Removable Ferrocerium firesteel is placed in the handle to get you out of a tough spot on a cold night. Add a good Para-Cord lanyard, and you have the makings of a real tool for the outdoor adventure seeker. The Kydex sheath is heat molded to each individual knife. The tubular rivets that hold the sheath together are grouped in a Tek-Lok or a Molle-Lok pattern. Handling the G6 SK is truly ambidextrous and can be worn in any direction.



CHECK OUT THIS BUILD THREAD OF THE CUSTOM G6-SK for AWCC 2011:
http://www.rccrawler.com/forum/chit-chat/321620-awcc-1st-place-prizes-build-thread.html

[CrAwLeR13]

That's awesome Rodney. Hope I can get me hands on one of hose bad boys.

[hi its rick]

lets see sum rigs

[GCRad1]

Hi Mr. Hi It's Rick,

Its not time to see some rigs just yet. Come out JUNE 22-24th for AXIALFEST and or wait till after the event and we will show you lots of rigs.

If you can't wait and want to see lots of rigs right now, click over here to last years event threads as there are a lot of photo threads in their and you can see "sum" rigs in there:http://www.rccrawler.com/forum/axial-xr10/263847-xr10-picture-archive.html

SCX10 Picture Archive
http://www.rccrawler.com/forum/axial...e-archive.html

Wraith Picture Archive
http://www.rccrawler.com/forum/axial...e-archive.html

Axial EXO Terra Buggy Picture Archive
Axial EXO Terra Buggy Picture Archive - RCShortCourse.com Bulletin Board

And after you get finished reviewing all that and still need to see some more, then you will have to just read the general AX10 Ridgecrest thread as there is not a photo thread on it yet, but there are some images of it in there:
Axial Ridgecrest | RCCrawler.com

After you finish all the photo threads then you cn start on the videos...

[VP Dan]

anything new ?

[DRIVNMF]

I'm working on a scale solar shower unit for the scale campsite contest!

Next is the 5 gallon trail toilet! I'm gonna win this, if any knows how to set up a camp for dolls, err, I'm mean a scaler, it's me!

[zonkerd]

so a scale theme camp site for your scaler mmmmmmmmmm have to start some work

[frdtrkguy]

Originally Posted by DRIVNMF

I'm working on a scale solar shower unit for the scale campsite contest!

Next is the 5 gallon trail toilet! I'm gonna win this, if any knows how to set up a camp for dolls, err, I'm mean a scaler, it's me!

, Hopefully its not madatory just highly recommended

[VP Dan]

any more info

[zonkerd]

cant wait!!!!!!!!!!!! working on somthing going to be kickass

[Jrob]

Originally Posted by zonkerd

cant wait!!!!!!!!!!!! working on somthing going to be kickass

Yea it is!!! I've seen a sneak peek

[DRIVNMF]

Originally Posted by dan wilson

any more info

X2..

[yjbrad]

Originally Posted by zonkerd

cant wait!!!!!!!!!!!! working on somthing going to be kickass

You Crazy

[Jrob]

Originally Posted by yjbrad

You Crazy

It's one of the sickest scalers I've ever seen!