RCCrawler Forums

Old One · 07-27-2007, 11:31 PM

Quote:

Originally Posted by DARKHORSE

Your just wrong charlie:-( I work so hard for you guys and this is what I get. LOL

Todd, Dont listen to charlie or ricky cause these guys havent taken their ginkobiloba latley.. The alzheimers has sat in to much on these old guys...

Todd, Our last comp we were crawling on the volcano, But the midwest comp we will be setting some courses up on the rock garden, Most likely for the supers.. What kind of rigs do you have?

LOL, I won't get in the middle of that.:-P

We've got 3 2.2's
1-sw2-pede. tranny, locked. Nothing fancy
1-BMvii, losi trans. my sons rig.
1-TLT w/a few mods, but mostly a looker. R2 trans, stretched

We'll try to get out on the 11th, if nothing else, to watch and I need to stretch the broncos legs a bit. Its been sitting since our last trip to disney in april.

chip cross · 07-27-2007, 11:40 PM

good to see DARKHORSE found ya i told him you were in OK hope i see you an Mid West Nationals oyea i miss my truck

Shaun · 07-27-2007, 11:42 PM

Quote:

Originally Posted by Old One

Hey, Darkhorse pm'd me and said to stop in and say hi. I didn't even know there were any other Oklahoma folks on RCC. I live over in Nowata, about 40-50 minutes west of Disney.

Do you have a general Idea of where you'll set-up? Staircase, rockgarden, Waterfall, Lil Blu?
If you need any help, let me know.
Thanks Todd

Nice to see someone close. I'm in Tulsa. we go through Nowata all the time. Not sure if you know but what happen to that ATV place, theres tape all around it. Sorry to get off topic.

While I'm off topic.
http://www.rccrawler.com/forum/showthread.php?t=79377

Come on some knows they want to trade. I kinda just want a nice comp truck now, but a highlift would be nice.

Old One · 07-28-2007, 08:08 AM

Quote:

Originally Posted by shaun

Nice to see someone close. I'm in Tulsa. we go through Nowata all the time. Not sure if you know but what happen to that ATV place, theres tape all around it. Sorry to get off topic.

While I'm off topic.
http://www.rccrawler.com/forum/showthread.php?t=79377

Come on some knows they want to trade. I kinda just want a nice comp truck now, but a highlift would be nice.

Shaun:
The ATV park closure is suppose to be a temp thing. They closed it when the flood water came up. I think mostly to keep folks from dumping. That property is a multi use area. Airport, ATV park and a dump area for lawn clippings, tree brush etc. Pm me and I'll get you my phone#, give me a call when your up this way.

Chip:
You wouldn't recognize it. :-P Made a few chassis changes and of course an FJ40 body.......

Todd

Shaun · 07-28-2007, 08:17 AM

I think someone made a list of all the OKRCRC guys and their numbers. I'm not positive, but I'm pretty for sure its darkhorse.

ROCKEDUP RICKY · 07-28-2007, 12:39 PM

Quote:

Originally Posted by shaun

I think someone made a list of all the OKRCRC guys and their numbers. I'm not positive, but I'm pretty for sure

You are kinda cute I guess

Shaun · 07-28-2007, 03:09 PM

Quote:

Originally Posted by ROCKEDUP RICKY

You are kinda cute I guess

What the hell?:-?

EDIT, ohhh! I think I get it now, kinda, hell I'm not really sure I get it or not.

Don't call me cute or anything similar.

Tuffone · 07-28-2007, 11:37 PM

Tuffone · 07-29-2007, 01:14 AM

ROCKEDUP RICKY · 07-29-2007, 05:31 AM

Quote:

Originally Posted by shaun

What the hell?:-?

EDIT, ohhh! I think I get it now, kinda, hell I'm not really sure I get it or not.

Don't call me cute or anything similar.

Just goofen around,don't be mad.I'll try to watch what I call you,I'll try

DARKHORSE · 07-29-2007, 05:56 AM

Wow cory, It didnt take you long to tear it down and redo it. How does it flex now?

I see the axes are repositioned and your shocks are moved,.. Its looking good. Keep up the good work..

ROCKEDUP RICKY · 07-29-2007, 06:36 AM

Is that a proline chassis.one of your shock mounts is crooked.

Tuffone · 07-29-2007, 07:30 AM

No, I made this chassis last night. Yeah I have got to put two screws on the shock mount.

Tuffone · 07-29-2007, 07:49 AM

mrmaxxman · 07-29-2007, 08:05 AM

looks good, but i would spread the upper links at the chassis out a little bit,
mount them on the outside of your mounts, just a thought, but if it works dont fix it

halfcab · 07-29-2007, 08:50 AM

I would limit the travel a little

Tuffone · 07-29-2007, 11:35 AM

my chassis will not really let me put them on the outside. I will see how it does like this and maybe change it. Thanks for the advise.

CD13 · 07-29-2007, 11:44 AM

looks great,leave it like that

mrmaxman.what are you planning to run at the nats?

DARKHORSE · 07-29-2007, 02:28 PM

Quote:

Originally Posted by cdaniel13

looks great,leave it like that

Agreed

Quote:

Originally Posted by cdaniel13

mrmaxman.what are you planning to run at the nats?

His mouth...

ROCKEDUP RICKY · 07-29-2007, 03:14 PM

HERE'S our next comp place,it's big,
and we can drive right to it.

We'll try it out on the 11th.

If you look my super is parked out there in the 2nd pic.

07-27-2007, 11:40 PM	#42
chip cross ΜΟΛΩΝ ΛΑΒΕ Join Date: Dec 2006 Location: In tha Bush of Louisiana Posts: 4,343	Hey Todd good to see DARKHORSE found ya i told him you were in OK hope i see you an Mid West Nationals oyea i miss my truck

07-28-2007, 11:37 PM	#48
Tuffone Pebble Pounder Join Date: Jun 2007 Location: Cyril Posts: 153	Last edited by Tuffone; 07-29-2007 at 01:12 AM.

07-29-2007, 05:56 AM	#51
DARKHORSE RCC Addict Join Date: Jan 2006 Location: Oklahoma City, OK Posts: 1,329	Wow cory, It didnt take you long to tear it down and redo it. How does it flex now? I see the axes are repositioned and your shocks are moved,.. Its looking good. Keep up the good work.. Last edited by DARKHORSE; 07-29-2007 at 06:30 AM.

07-29-2007, 11:44 AM	#58
CD13 Holmes Hobbies Join Date: Jan 2007 Location: No Where Posts: 2,751	looks great,leave it like that mrmaxman.what are you planning to run at the nats? Last edited by CD13; 07-29-2007 at 11:52 AM.

07-29-2007, 03:14 PM	#60
ROCKEDUP RICKY Old guy Join Date: Jan 2007 Location: Northwest Arkie-saw and we got ROCKS! Posts: 7,548	HERE'S our next comp place,it's big, and we can drive right to it. We'll try it out on the 11th. If you look my super is parked out there in the 2nd pic. Last edited by ROCKEDUP RICKY; 07-29-2007 at 03:33 PM.

07-28-2007, 08:17 AM	#45
Shaun Rock Crawler Join Date: Dec 2005 Location: Tulsa, Oklahoma Posts: 857	I think someone made a list of all the OKRCRC guys and their numbers. I'm not positive, but I'm pretty for sure its darkhorse.

07-29-2007, 01:14 AM	#49
Tuffone Pebble Pounder Join Date: Jun 2007 Location: Cyril Posts: 153

07-29-2007, 06:36 AM	#52
ROCKEDUP RICKY Old guy Join Date: Jan 2007 Location: Northwest Arkie-saw and we got ROCKS! Posts: 7,548	Is that a proline chassis.one of your shock mounts is crooked.

07-29-2007, 07:30 AM	#53
Tuffone Pebble Pounder Join Date: Jun 2007 Location: Cyril Posts: 153	No, I made this chassis last night. Yeah I have got to put two screws on the shock mount.

07-29-2007, 07:49 AM	#54
Tuffone Pebble Pounder Join Date: Jun 2007 Location: Cyril Posts: 153

07-29-2007, 08:05 AM	#55
mrmaxxman Rock Crawler Join Date: Apr 2004 Location: toolsa, jokelahoma Posts: 501	looks good, but i would spread the upper links at the chassis out a little bit, mount them on the outside of your mounts, just a thought, but if it works dont fix it

07-29-2007, 08:50 AM	#56
halfcab RCC Addict Join Date: Oct 2005 Location: rite here all along Posts: 1,888	I would limit the travel a little

07-29-2007, 11:35 AM	#57
Tuffone Pebble Pounder Join Date: Jun 2007 Location: Cyril Posts: 153	my chassis will not really let me put them on the outside. I will see how it does like this and maybe change it. Thanks for the advise.

Sponsored Links

RCCrawler Forums

Thread: OKRCRC is going to DISNEY again,comp#4