no. 32 pitch is much too course. john posted the metric pinions earlier that work. |
Have the 2 Cobalt pullers driven off Rooster Crawler ESC They crawl great, and same as cathocism (sp?) I snapped my axle innards the first serious time crawling rocks. I used 0.6 mod pinions from Towerhobbies made by Novak for fitment of their motors to Duratrax stuff. They sell a 3-pack of 10,11,12 (or 11,12,13) and I used the smallest ones. I also had to relocate the lower links the outer positions. I wired 2 6cell packs in parallel for extra weight up from, but also have a smaller LiPo 7.4V pack to run singly if less weight is needed. Can drop truck onto it's side on wheels and it won't flip over, so balance seems good. See my pics for my HomeDepot chassis in the photo gallery. WB is 11.5-12 inches. |
links to these pinion packs please!!!!!!! |
|
link to Tower for what I bought and used 11,12,13 tooth mod 0.6 pinions, work fine, no modifications at all for the Cobalts in the CC. http://www3.towerhobbies.com/cgi-bin...?&I=LXUFE3&P=7 |
JRH, sorry for the threadjack, if you run 48 pitch gears, will these turn the diffs or will there be binding? |
normal 48p gears will wear down the internals on the CC. It wont even be close to proper mesh. |
would I be able to use that mamba micro with the stock motors and a single 3 cell 1320 mah lipo? |
All times are GMT -6. The time now is 01:45 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com