Dez's CC Zero

[dezfan]

And then the wife comes home and put me to work.:-(


Just waiting on a few parts and it should be good to go. Hope to have pics of the CCZ on the rocks real soon!

[cartronicshn]

Originally Posted by dezfan

And then the wife comes home and put me to work.:-(


Just waiting on a few parts and it should be good to go. Hope to have pics of the CCZ on the rocks real soon!

I hear ya on the wife part, are you getting new motors? i tried the 454's from JRH and for the few seconds the cc actually ran, i was really impressed on the low end balls this thing have, and the wheelspeed was awesome, all of this on nimh 6 cell

[dezfan]

Originally Posted by cartronicshn

I hear ya on the wife part, are you getting new motors? i tried the 454's from JRH and for the few seconds the cc actually ran, i was really impressed on the low end balls this thing have, and the wheelspeed was awesome, all of this on nimh 6 cell

I'll install a set of the Mini Pullers, but first I want to upgrade all of the gears and the out-drives to the metal components. After the metal parts are installed and the Pullers are in, I might even try the CC axles out w/ a set of 2.2s?

[cartronicshn]

Originally Posted by dezfan

I'll install a set of the Mini Pullers, but first I want to upgrade all of the gears and the out-drives to the metal components. After the metal parts are installed and the Pullers are in, I might even try the CC axles out w/ a set of 2.2s?

I think with the aluminum gears it w2ill take the abuse of the mini pullers, not so sure on the 2.2's , sounds like there might be carnage, get pics

[jdawg53]

I've been running the HH puller motors for a while now and ran it quite a bit out in Moab at the Nationals to pass the time. I ran a 5 cell battery located over the front servo with a Novak Rooster Crawler and the performance was VERY good. I will definately be taking the Rooster out in the future and swapping for a FXR. I am using FXR-Pro's in my Berg and I prefer the FXR's over the Rooster. Just my opinoin.
I also tried an 8 cell battery with the puller motors and it was well.....rediculous to put it mildly Too punchy and way more wheel speed than you need for crawling. I think 5 cells works very well, but will be trying 6 cells once all my stuff gets back from Moab just to see how it performs.
I highly recommend the Holmes Hobbies puller motors.

[dezfan]

Originally Posted by jdawg53

I've been running the HH puller motors for a while now and ran it quite a bit out in Moab at the Nationals to pass the time. I ran a 5 cell battery located over the front servo with a Novak Rooster Crawler and the performance was VERY good. I will definately be taking the Rooster out in the future and swapping for a FXR. I am using FXR-Pro's in my Berg and I prefer the FXR's over the Rooster. Just my opinoin.
I also tried an 8 cell battery with the puller motors and it was well.....rediculous to put it mildly Too punchy and way more wheel speed than you need for crawling. I think 5 cells works very well, but will be trying 6 cells once all my stuff gets back from Moab just to see how it performs.
I highly recommend the Holmes Hobbies puller motors.

Yeah, Johnrob and I did some crawling right before Nat's and the Mini Pullers are just as amazing as their bigger brothers.

Like I said, at some point I intend to really put the hurt on these axles and test them w/ the Pullers and running full size 2.2s!

[jdawg53]

I ran Losi Claws and Proline Hammers with no problems.

[dezfan]

Originally Posted by jdawg53

I ran Losi Claws and Proline Hammers with no problems.

That's good to hear!

[brushlessnut]

Originally Posted by dezfan

Thanks guys, like I stated, we're (CMRCRC) going to run a 10.5 class w/ 1.9s and this is my "secret" weapon!

o really so can i make a nother set of driveshaft and links for my sw3 and put some 1.9's on it after I run it in the 2.2 class

[twisted]

anyone got any footage of the mini pullers in the cc ?

[dezfan]

Originally Posted by brushlessnut

o really so can i make a nother set of driveshaft and links for my sw3 and put some 1.9's on it after I run it in the 2.2 class

Pffft, it's still a shafty.

:-P

[brushlessnut]

have you even beat me at a comp yet or rikki??? jk yea i plan on putting my shaft away soon frist we'll see how the next comp i can make gose

[dezfan]

Cocky little shit huh.

Anyone can be lucky twice!:-P

Hope to see you guys again soon, you going to Crawlapalooza?

[brushlessnut]

naww to long of a drive inless we can drive there and ride down with you guys lucky shit when im around your rig dont even wanna work