besides soldering on longer wires:?: i have a flat pack in the front of mine and a cube shaped one in the rear. there is a lot of wire in between.

im gonna think about ittt,
talk to you guys tomorrow

i just went out and tested the new susp, and it works great. i love itt. i recommend someone do this. the only problems are i cant fit the battery on the servo because the wire is too short

i jst finished lengthing mine about half an hour ago i used all axial links

lets see some pics?

no camera hope to go out this weekend with some of the oc crawlers. one of those guys had a camera last weekend. so im hoping i can get him to take some shots of mine so i can post them. i used xtm accelerator shox in the all around and linited the travel in both directions. 3/4 in on the rebound(in) and 1 1/4 on the bound(out). the axel can go 90deg. of eachother. now i need to get some holms motors

berg chasis make it longer as well that where mine come from. the zero chasis is for the breg

http://i455.photobucket.com/albums/q...g?t=1226672268
finaly got some pics
http://i455.photobucket.com/albums/q...g?t=1226671850
flex shot
http://i455.photobucket.com/albums/q...g?t=1226672522

that looks really really nice

it crawls rad to but needs just a lil bit more power

well i have a bunch of upgrades, so here it goes. i took a less stiffer shock spring and cut about a centimeter of it so it would get better droop, i got the hammer m3s, axial rockster beadlocks, and my dad got a cliff cilmber as well. here are some pics. tell me what you think.

I did some more mods, new traxxas links (longer) stiffer springs, and thats it. i finally made some videos you can check them out here.


http://www.youtube.com/watch?v=4zm_YE98GKc

and another one

http://www.youtube.com/watch?v=6KnVsQkKYeM

comment if you want

i love the hammers on mine. but u the lft side on correct and the left on backwards.

I suggest moving your battery onto your servo so that way there is some more weight in front AND lower center of gravity.
=)