RCCrawler Forums

gigercreeper · 11-09-2008, 12:38 AM

besides soldering on longer wires

i have a flat pack in the front of mine and a cube shaped one in the rear. there is a lot of wire in between.

AJrc · 11-09-2008, 12:41 AM

im gonna think about ittt,
talk to you guys tomorrow

AJrc · 11-09-2008, 11:06 AM

i just went out and tested the new susp, and it works great. i love itt. i recommend someone do this. the only problems are i cant fit the battery on the servo because the wire is too short

gigercreeper · 11-09-2008, 11:41 PM

i jst finished lengthing mine about half an hour ago i used all axial links

AJrc · 11-10-2008, 10:35 AM

lets see some pics?

gigercreeper · 11-10-2008, 09:29 PM

no camera hope to go out this weekend with some of the oc crawlers. one of those guys had a camera last weekend. so im hoping i can get him to take some shots of mine so i can post them. i used xtm accelerator shox in the all around and linited the travel in both directions. 3/4 in on the rebound(in) and 1 1/4 on the bound(out). the axel can go 90deg. of eachother. now i need to get some holms motors

randy1 · 11-12-2008, 11:29 AM

berg chasis make it longer as well that where mine come from. the zero chasis is for the breg

gigercreeper · 11-14-2008, 08:23 AM

finaly got some pics

flex shot

AJrc · 11-14-2008, 09:44 AM

that looks really really nice

gigercreeper · 11-14-2008, 06:11 PM

it crawls rad to but needs just a lil bit more power

AJrc · 11-27-2008, 12:05 PM

well i have a bunch of upgrades, so here it goes. i took a less stiffer shock spring and cut about a centimeter of it so it would get better droop, i got the hammer m3s, axial rockster beadlocks, and my dad got a cliff cilmber as well. here are some pics. tell me what you think.

AJrc · 12-10-2008, 10:16 AM

I did some more mods, new traxxas links (longer) stiffer springs, and thats it. i finally made some videos you can check them out here.

http://www.youtube.com/watch?v=4zm_YE98GKc

and another one

http://www.youtube.com/watch?v=6KnVsQkKYeM

comment if you want

gigercreeper · 12-10-2008, 05:57 PM

i love the hammers on mine. but u the lft side on correct and the left on backwards.

SDBigBubba · 12-14-2008, 07:08 PM

Quote:

Originally Posted by AJrc

I did some more mods, new traxxas links (longer) stiffer springs, and thats it. i finally made some videos you can check them out here.

http://www.youtube.com/watch?v=4zm_YE98GKc

and another one

http://www.youtube.com/watch?v=6KnVsQkKYeM

comment if you want

I suggest moving your battery onto your servo so that way there is some more weight in front AND lower center of gravity.
=)

11-27-2008, 12:05 PM	#51
AJrc Newbie Join Date: Nov 2008 Location: Los Banos Posts: 40	well i have a bunch of upgrades, so here it goes. i took a less stiffer shock spring and cut about a centimeter of it so it would get better droop, i got the hammer m3s, axial rockster beadlocks, and my dad got a cliff cilmber as well. here are some pics. tell me what you think. Last edited by AJrc; 01-12-2009 at 11:08 PM.

12-10-2008, 05:57 PM	#53
gigercreeper Quarry Creeper Join Date: Oct 2008 Location: fullerton Posts: 273	i love the hammers on mine. but u the lft side on correct and the left on backwards. Last edited by gigercreeper; 12-10-2008 at 05:59 PM. Reason: retard

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-09-2008, 12:38 AM	#41
gigercreeper Quarry Creeper Join Date: Oct 2008 Location: fullerton Posts: 273	besides soldering on longer wires i have a flat pack in the front of mine and a cube shaped one in the rear. there is a lot of wire in between.

11-09-2008, 12:41 AM	#42
AJrc Newbie Join Date: Nov 2008 Location: Los Banos Posts: 40	im gonna think about ittt, talk to you guys tomorrow

11-09-2008, 11:06 AM	#43
AJrc Newbie Join Date: Nov 2008 Location: Los Banos Posts: 40	i just went out and tested the new susp, and it works great. i love itt. i recommend someone do this. the only problems are i cant fit the battery on the servo because the wire is too short

11-09-2008, 11:41 PM	#44
gigercreeper Quarry Creeper Join Date: Oct 2008 Location: fullerton Posts: 273	i jst finished lengthing mine about half an hour ago i used all axial links

11-10-2008, 10:35 AM	#45
AJrc Newbie Join Date: Nov 2008 Location: Los Banos Posts: 40	lets see some pics?

11-10-2008, 09:29 PM	#46
gigercreeper Quarry Creeper Join Date: Oct 2008 Location: fullerton Posts: 273	no camera hope to go out this weekend with some of the oc crawlers. one of those guys had a camera last weekend. so im hoping i can get him to take some shots of mine so i can post them. i used xtm accelerator shox in the all around and linited the travel in both directions. 3/4 in on the rebound(in) and 1 1/4 on the bound(out). the axel can go 90deg. of eachother. now i need to get some holms motors

11-12-2008, 11:29 AM	#47
randy1 Pebble Pounder Join Date: Sep 2008 Location: usa Posts: 168	berg chasis make it longer as well that where mine come from. the zero chasis is for the breg

11-14-2008, 08:23 AM	#48
gigercreeper Quarry Creeper Join Date: Oct 2008 Location: fullerton Posts: 273	finaly got some pics flex shot

11-14-2008, 09:44 AM	#49
AJrc Newbie Join Date: Nov 2008 Location: Los Banos Posts: 40	that looks really really nice

11-14-2008, 06:11 PM	#50
gigercreeper Quarry Creeper Join Date: Oct 2008 Location: fullerton Posts: 273	it crawls rad to but needs just a lil bit more power

Sponsored Links

12-10-2008, 10:16 AM	#52
AJrc Newbie Join Date: Nov 2008 Location: Los Banos Posts: 40	I did some more mods, new traxxas links (longer) stiffer springs, and thats it. i finally made some videos you can check them out here. http://www.youtube.com/watch?v=4zm_YE98GKc and another one http://www.youtube.com/watch?v=6KnVsQkKYeM comment if you want

RCCrawler Forums

Thread: Cliff Climber