Cliff Climber Well, since we kinda took over salgons thread im starting my own. |
i think that was the rite thing to do |
so right now im working on the suspension links. Ill post some pcs in a few |
are those tmaxx links all the same length? i finially put mine to the test and its git to b longer. does crawl better wth the 2.2 hammers than the stockers all trimmd up. the clod stall wasnt realy prevelant either. everthing is still stock jst reconfigured ans still havent broke or stripped nything on this i love these little things"thumbsup" so wats the total legnth wth the tmaxx links:?: |
i just finished and these are revo links and i took them all off and checked, and they are all the same. here are the finished pics, i didnt even have time to run outside, too dark. tell me how it looks and tips no fflash http://i112.photobucket.com/albums/n...t/MVC-033L.jpg flash http://i112.photobucket.com/albums/n...t/MVC-034L.jpg barely a flex shot :] http://i112.photobucket.com/albums/n...t/MVC-035L.jpg |
take off the shock |
truck is way to tall . u need the belly of the truck to be 3 in . nothing wrong with trying to make it longer but u are going about it all wrong. |
you mean like the spring?? im kinda new to crawling, but what would that do to the suspension? |
un do the shocks . set somthing under truck that is close to 3 in. an tell me how long ax to ax is |
the shock are to long u need limit them or u need shorter shocks. ideal u need the belly of the truck 3 in. off the ground |
ok hold on a secc, maybe like ten minutes |
lookin like a monster crawler"thumbsup""thumbsup". r the shox all the way back in the last mounting hole? i think i will give those links a try on mine. will the stock shox still attach:?::?: i would try to run it a little flatter lower the cg |
http://i457.photobucket.com/albums/q...Picture012.jpg here if u look at mine its not all jacked up in the center . this is what u are after |
giger, i tried the stock shocks on the front links, and it had NO support. it wouldnt crawl. the links are perfect for me so far. but the stock shocks can not handle the links. |
so your links are going to make this lil truck like 11.5 or 12 in ax to ax sounds like |
randy, from axle to axle is from like 8-10 inches. |
with the shocks hooked up |
nooo not hooked up |
then the stock shoks should work . mine is 10.25 ax to ax |
my stock shocks couldnt hold it. but ya lets see you do the shocks. id love to hear if it worked. |
stock is 9.25 so if your 8 you have lost |
i put a pick up there for ya . its 3 in. belly like i told ya an its 10.25 ax to ax dont no what u have done wrong |
http://i284.photobucket.com/albums/l...PICT0190-1.jpgsee how these shocks are mounted on the links. that probly would b the cheepest maybe the best way to fix this sus prob. then you could use the stock shox and limit the travel so as not to go less than 9 or watever you want it to b. |
ok i think ive got it for u |
i think i mightve done it wrong |
here is what i think after lookin at my stocker . unhook the top links at the chasis an u want the servo to be flay on top so u will need to shorten the top links an this should fix it all |
if u mount the top link on on the lowest part of the chasis behind the front link it will change the angle of the servo without adjusting the link |
yes he has to shorten top links i think that will fix all of it |
hmmmm... |
pm sent to ya aj |
what are your guy's weight on your cliff climber |
losi 30wt fornt 40wt ae in the rear. jst happened to be differnt brands no preference |
no i meant like overwall weight. like pounds |
aji have 3 oz . in each front wheel an 2 oz. in each rear wheel |
no no no no. like the weight of the truck. mine weighs almost 4 pounds. a little on the heavy side? |
around four pound according to my scale |
thats with the 8 sub-c cell battery pack |
oh ok. thats not badd . does anyone know how to extend the length of battery to the connecter. i cant strap it on my front servo. it wont reach |
the guys that i crawled wth to day they all had axial based crawlers, there trucks were twice as heavy easily and they had little reciever lipos. they all had those 130 dollar rims wth the slugs in them |
:shock:i would never spend that much on rimsss |
All times are GMT -6. The time now is 01:44 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com