09-01-2009, 10:48 PM | #1 |
Newbie Join Date: Sep 2009 Location: Mo Town
Posts: 4
| 1.9 on a cliff climber
I was wondering if 1.9 wheels would fit on un-modified CC hubs. Is there enough clearance around the c-hubs? I'm lookin to buy a CC soley for a semi scale build usin an FJ hardbody, and would like to use Highlift wheels/tires or even Losi MRC wheels. Any ideas would be greatly appreciated. I just now finally signed up as a user on this site, but you guys have helped a bunch with info on building my WK. |
Sponsored Links | |
09-01-2009, 11:53 PM | #2 |
Pebble Pounder Join Date: Apr 2008 Location: Vancouver, Wa
Posts: 155
|
I used 1.9 Bead locks on mine with very minor modification, on the very end of the hex where the rim sits flush to I cut off that small round lip and everything is good |
09-02-2009, 01:37 AM | #3 |
Rock Stacker Join Date: May 2008 Location: Luxembourg/Europe
Posts: 50
|
Fitting 1.9's on a stock CC is no problem. Like LeDevil said, you only need to cut off the small lip on the hexes. I run 1.9 Axial beadlocks on mine but I've used standard size hexes from Tamiya so that the width of the axle fits better to the body. Ther only thing I had to do there was cut the Thread further down and cut off a bit of the axles stub. |
09-02-2009, 01:09 PM | #4 |
Rock Stacker Join Date: Nov 2008 Location: Fisher
Posts: 62
|
I've put them on mine as well. They work great
|
Thread Tools | |
Display Modes | |
| |