tire rub...wheel offsets?
 

the problem im having is: moved links & shocks to the outside, (to clear banebots 395's) now my proline & 2.2 rovers are rubbing:shock: i tried my buddies readcat beadlocks & rover 2.2's, not as much rub but still cant go to full lock. i'm looking for a wheel with less offset as 8 shooters. -offset. any ideas fellas?

yep i run the mayhem 7s full offset. they have no inside lip on the inside of the wheel.

http://img5.imageshack.us/img5/2338/wheels4shaved.jpg

http://img8.imageshack.us/img8/3313/wheels5.jpg

I would get a hold of Mayhem Eng."thumbsup"

^^ thanks fellas "thumbsup"

any other ideas out there? was gonna try the rc4wd axle extender. i was wanting to stay with a plastic wheel. (cheap) limited (for now) budget:-(

I cut the inner bead off the stock wheels ... they are almost flush with the mounting surface now. I use silicone to glue my tires now so I can still swap and re-use later. Guess I just like the stock wheels.

cut the what? off of where?

as for the wheels i want...wife said to wait. spending too much on my $100 CC. i've only had the thing like a month or so. damn that wife:lmao:

true to that........:cry::evil::lmao:

I narrowed the wheel from the inside ... removed the entired inner bead (part the tire fits into) and re-glued the outer lip back on ... I have about 1/8" offset now and a narrower wheel.

i found wheels! rc4wd rock rippers have the same offset as a stock bully's aluminum beadlock. i tried my buddies wheels and they cleared all my links lock to lock no rub"thumbsup"