2012 Scale Dash & Poker Run

[bigstu]

Originally Posted by XJ Farmer

I'm bringing this pig for the fun.

Pro 4 4000 ready to rip or rip the wraith apart a little more I brought it with me to Florida for a little fun. I hope it makes it home

Later,
Farmer

Take lots of drive shafts and a spare ring and pinion, or two, might not be a bad idea Farmer.
Good luck to everyone, this looks like a lot of fun.

[DickyT]

I am trying to get this junk done in time:

[Farmer]

Originally Posted by bigstu

Take lots of drive shafts and a spare ring and pinion, or two, might not be a bad idea Farmer.
Good luck to everyone, this looks like a lot of fun.

I should be fine, this pig is built to the balls. Thanks to my great sponsor Rick at SuperShafty.com Im worried about universals and axle shafts

Later,
Farmer

[brazwewn]

I'm hoping my Mamba Max Pro arrives next week.

Wes

[Lushtrucker]

I could run the wraith with the pro4 motor, but the f650 with a puller is probably a lot more capable and quicker than I usually feel like running

[richardgarrett56]

Originally Posted by DickyT

I am trying to get this junk done in time:

not gunna happen

[666]

I should be there with this for that.

[Scattman]

Better watch out, weighed my Heep at the last TTC event and it weighed 6.66 pounds.

Originally Posted by 666

I should be there with this for that.

[rockpayne]

I am in for sure, just a few parts to fix or fine tune on the "Hellbilly Hotrod" and it is ready!

[chicklet]

Originally Posted by Scattman

Better watch out, weighed my Heep at the last TTC event and it weighed 6.66 pounds.

Pfff mine weighs 7.1lbs

I'll be bringing Tuna Tunnel 3 with me...

[Fishmaxx]

Went to LRC yesterday and planned the route for the course.

GPS says we walked 1.7 miles and we did very little backtracking.

There will be 10 card stations various distances apart up to about 300 yards.

I need to make sure I have enough card per station, so an accurate head count is very important.


If your name is not on the list you are not running in the Scale Run......unless you get it fixed ASAP

1. Jeepsohigh
2. EvilTwin_v2
3. Ittybitty
4. cavie98
5. PaloAltoK5
6. chicklet
7. brazwewn
8. 4xFord
9. TURBOFEST
10. WheelinKING
11. Gabe Choate
12. Scatterbrains
13. Limited77
14. XJ Farmer
15. richardgarrett56
16. ovalman
17. JeremyH
18. 666
19. RolandRockshop
20. Colby
21. KennyJ
22. Stick King
23. Tydl
24. CCC22
25. Michael Pace
26. Rcrocin'
27. Rockpayne
28. Jake
29. 3jeeps
30. Carlo Ribera II
31. nicodrive01
32. DickyT
33. Scattman
34. JimmyJam
35. Rocksrock
36. Lushtrucker
37. FishMaxx
38. Destroyer
39. JSlick
40. Robotboy

[Jslick]

Just paid for the Scale Dash.

[DickyT]

Originally Posted by richardgarrett56

not gunna happen

Only need to get the seats and driver mounted




and maybe add some center console stuff, make a fuel cell to cover the rear servo and something to cover the 4s lipo that powers the LED's


This pig weighs in at the 10.5'ish lb range... good thing I have no plans to win the dash. more like leisurely stroll for me!

[Robotboy]

Originally Posted by Jslick

Just paid for the Scale Dash.

As did I

Can't wait to see some old friends and meet some new

[Jslick]

Bob so glad to hear that you are coming up. Can't wait to see you again.

John

[Scattman]

Originally Posted by Jslick

Bob so glad to hear that you are coming up. Can't wait to see you again.

John

I have bugging the hell out of him, trying to get him to come up with us. It finally paid off.

[Robotboy]

Originally Posted by Scattman

I have bugging the hell out of him, trying to get him to come up with us. It finally paid off.

+

What more can I say

[Jslick]

Originally Posted by Scattman

I have bugging the hell out of him, trying to get him to come up with us. It finally paid off.

Glad your pestering paid off.

[kennyj]

Yay Bob. I cant wait to drive that thing!!

[DickyT]

Originally Posted by Robotboy

+

What more can I say

Glad your gonna be there Bob, it will be good to see you again!