05-27-2005, 02:52 PM | #1 |
Quarry Creeper Join Date: May 2004 Location: Neosho
Posts: 301
| Probs with ESC
I am having a problem with my TXT. The last time I ran it at first it would just lose the connection, like a loose plug or something. Then towards the end of the run it would not run at all. Would it be a bad connection or am I going to have to buy another ESC? I am running a SR with Hitech Transmitter/Receiver and stock motors
|
Sponsored Links | |
05-27-2005, 03:07 PM | #2 |
Rock Crawler Join Date: Aug 2004 Location: woods cross utah
Posts: 523
|
how many runs on the motors? i guess wiring or the esc has de-programmed itself and needs to be reprogrammed.
|
05-27-2005, 03:09 PM | #3 |
Rock Crawler Join Date: Aug 2004 Location: woods cross utah
Posts: 523
|
if you are using the stock tamiya connectors that could also be your problem
|
05-27-2005, 03:09 PM | #4 |
Quarry Creeper Join Date: Nov 2004 Location: MANVILLE
Posts: 413
|
if you still have the stock tam plugs on then that is the problem.replace with good deans plugs
|
05-27-2005, 03:20 PM | #5 |
Quarry Creeper Join Date: May 2004 Location: Neosho
Posts: 301
|
I didnt think bout the connectors. You are talking bout the ones for the motor right? My light on the ESC is on like it has power to it, but the truck does not respond.
|
05-27-2005, 03:29 PM | #6 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
|
the connectors on your motor, and the ones on your batter/esc. replace them all with deans, or hardwire. |
06-02-2005, 05:59 AM | #7 |
Quarry Creeper Join Date: Oct 2004 Location: Cow crap flats
Posts: 341
|
sounds like it could be bad brushes also.
|
06-02-2005, 11:58 AM | #8 |
RCC Addict Join Date: Dec 2004 Location: Central NY
Posts: 1,980
|
its definatly the connector. i had the same problem. is the whole truck shuting down, like the reciever and all?
|
06-03-2005, 12:39 PM | #9 |
Quarry Creeper Join Date: May 2004 Location: Neosho
Posts: 301
|
It shuts down and wont do a thing, but like I said earlier the light on the ESC is on like it has power to the ESC, but not to the motors or servo.
|
| |