01-25-2008, 08:38 AM | #1 |
Newbie Join Date: Feb 2007 Location: Boulder
Posts: 7
| esc question
hooked all my electronics up (new rooster crawler) havent adjusted anything yet but it seems as though the motors turn faster when i pull trigger on controller in reverse. i have dual motors.....
|
Sponsored Links | |
01-25-2008, 04:02 PM | #2 |
Quarry Creeper Join Date: May 2007 Location: melbourne, australia
Posts: 274
|
check your motor timing
|
01-25-2008, 04:40 PM | #3 |
Rock Crawler Join Date: Apr 2006 Location: Pineville Ky
Posts: 503
|
Check to see if your radio is set on 70/30 or 50/50 throttle setting.
|
01-26-2008, 12:52 PM | #4 |
I'm a stupid C U N T! Join Date: Jun 2005 Location: In the Garage!
Posts: 4,307
|
do you have you're servo reversed on the radio? try that and reprogram |
01-27-2008, 12:26 AM | #5 |
Rock Crawler Join Date: May 2007 Location: lacey
Posts: 833
|
is it faster in reverse or does it just seem that way. alot of people arent used to seeing their vehicle move as fast backwards as forwards. it could simply be a visual trick to your eye...also, most people just getting into crawler driving don't have a very sensitive touch on the reverse end, usually giving it waaaaay to much making them seem touchy or fast in reverse.
|
02-02-2008, 07:46 AM | #6 |
Newbie Join Date: Feb 2007 Location: Boulder
Posts: 7
|
its faster in reverse and 1 motor spins slower......
|
02-02-2008, 07:49 AM | #7 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
|
Did you program the throttle endpoints? Sounds like you have some timing on the motors too, what kind are they?
|
02-02-2008, 02:58 PM | #8 |
Quarry Creeper Join Date: Jul 2005 Location: pleasant ridge
Posts: 317
|
first is this a clod? the slower motor could just be the diff. in friction between the front and rear gearbox.is the blue wire hooked to the neg. on the rear motor?
Last edited by thatguy; 02-02-2008 at 03:18 PM. |
Thread Tools | |
Display Modes | |
| |