esc question hooked all my electronics up (new rooster crawler) havent adjusted anything yet but it seems as though the motors turn faster when i pull trigger on controller in reverse. i have dual motors..... |
check your motor timing |
Check to see if your radio is set on 70/30 or 50/50 throttle setting. |
do you have you're servo reversed on the radio? try that and reprogram"thumbsup" |
is it faster in reverse or does it just seem that way. alot of people arent used to seeing their vehicle move as fast backwards as forwards. it could simply be a visual trick to your eye...also, most people just getting into crawler driving don't have a very sensitive touch on the reverse end, usually giving it waaaaay to much making them seem touchy or fast in reverse. |
its faster in reverse and 1 motor spins slower...... |
Did you program the throttle endpoints? Sounds like you have some timing on the motors too, what kind are they? |
first is this a clod? the slower motor could just be the diff. in friction between the front and rear gearbox.is the blue wire hooked to the neg. on the rear motor? |
All times are GMT -6. The time now is 04:08 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com