RCCrawler Forums
Page 43 of 43 « First 333839404142 43
Show 40 post(s) from this thread on one page

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Electronics (http://www.rccrawler.com/forum/electronics/)
-   -   Kaetwo's Tekin FX-R Review... (http://www.rccrawler.com/forum/electronics/105316-kaetwos-tekin-fx-r-review.html)

jaloos 08-26-2013 06:31 AM
Re: Kaetwo's Tekin FX-R Review...
 
Quote:
Originally Posted by Paul1234 (Post 4454392)
Hi all.
Looking at getting a fxr 35t combo.Is it any advantage getting the fxr pro or is the just the fxr ok.Also with the motor is the pro 35t motor much better than the 35t hd motor.Just wondering with you guys were using.Is the pro version just have a lower motor limit or extra settings and does the 35t pro motor being hand wound make any difference.
Thanks Paul.
Think you answered your question on the FXR Pro and the lower turn motor limit as well as the 35t Pro being better because of the hand winding.

Paul1234 08-26-2013 07:30 AM
Re: Kaetwo's Tekin FX-R Review...
 
Thanks for that so im not bothered about lower turn limit on the fxr pro then ill get the fxr thought there might be more settings on it but what difference does a hand wound motor make over the 35t hd one.
Paul.

Ty@Tekin 08-26-2013 10:33 AM
Re: Kaetwo's Tekin FX-R Review...
 
Quote:
Originally Posted by Paul1234 (Post 4454448)
Thanks for that so im not bothered about lower turn limit on the fxr pro then ill get the fxr thought there might be more settings on it but what difference does a hand wound motor make over the 35t hd one.
Paul.
Both ESCs have the same settings, only difference is the Pro is taller due to the 3rd board for more FETs, thus the lower motor limit.

The handwound motors are a little more efficient but the HDs provide more torque. Really they are both awesome motors though.

Paul1234 08-26-2013 11:17 AM
Re: Kaetwo's Tekin FX-R Review...
 
Ok thanks for that I'll get the fxr 35t combo with the hd motor will I need to get the hot wire pc link as well. How often does the esc software get up dated and is easier to set using a computer this is all new to me only used very basic esc before.
Thanks Paul.

SickBoy 06-08-2014 05:25 PM
Re: Kaetwo's Tekin FX-R Review...
 
I plan on ordering the fxr/35t hd motor combo to run in my scx10 wrangler g6. I want to run lights. Do I need an external bec? If so which one?

NOUSEFORANAME 12-14-2014 08:46 AM
Re: Kaetwo's Tekin FX-R Review...
 
Can the FX-R Pro handle dual 17 turn motors on 2s, or dual 27 turn silver can kit motors on 3s in a clodbuster with stock tires and 13 tooth pinions?

(ratings only support dual 20 turn on 2s, and single 35 turn on 3s)

Thanks.


All times are GMT -6. The time now is 08:28 AM.
Page 43 of 43 « First 333839404142 43
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com