|
| LinkBack | Thread Tools | Display Modes |
02-25-2008, 12:49 AM | #1 |
Rock Stacker Join Date: Dec 2007 Location: 45th Parallel
Posts: 79
| DX6 Throttle Dual Rate ---Solved
Problem: Needed dual rate on DX6 Throttle. Reason: I run an AX10 with Novak Goat & 21T Brushless motor @ 30% Travel Adjustment forward & 15% travel in reverse . Running a 12T Pinion & 87T Spur (geared Low & Strong). Sometimes I need to Spin the Wheels a little more aggressively when for wheel spin - on demand. Solution: Using a Mix (a,b or c) set channel 1 as both the Master (1) & Slave (1). Assign the mix to the Elevator Dual Rate switch (any switch will do- the Elevator Dual rate is above the throttle). Set the % rate above the current Travel adjustment rate (set mine to 50% Note that both forward (+) & reverse (-) can be set for differing % just move the throttle stick up or down to (+ or -) to adjust the additional travel/ power/ Speed. Offset is "0". Having dual rates on the throttle is also handy when you hand over the Tx to someone who may not like the normal sensitive throttle settings. Flynfrog Last edited by Flynfrog; 02-25-2008 at 12:52 AM. |
Sponsored Links | |
| |