brushless outrunner motors so I was looking at the brushless outrunner motors on the holmes hobby site and wanted to know which one of the 49 dollar motors would be a good one for crawling? thanks. |
Any motor on Holmes Hobby is good for crawling! "thumbsup" |
Uuhm sorry but the 49,99 dollar motors(Crawl master, revolvers etc) are ment for crawlers and so they are sold like it. I mean that all those are crawler motors, they are all good for crawlers. If its your first BL outrunner in a crawler and you re still getting used to the power i would suggest the revolver, but when you want monster power that can shred your rig in 2 and still want to have power to spare than the Crawlmaster is a very good option. Hope this helped ;-) |
I run a 850kv outrunner. Very low rpm but very high torque. It is geared a little higher and i run 6 cells to keep from breaking SH__. But i s very easy to run motor. What king of rig are you running? That will make a huge difference |
I'm running a wheely king, that I have streached to wb to 12.5" |
In a wheely king the revolver is easier to gear low with. I will have revolvers back in stock before the Crawlmasters too, both factories are being very slow with the manufacturing and I am out of stock. |
ok thanks john, I will keep checking your site fro the revolver. thanks. |
All times are GMT -6. The time now is 10:11 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com