Dynamite Vision Peak Ultra ???
 

I don't know if this would be a good charger. I would like to change over to lipo but did not want to spend alot of money. I listed the spec. Thanks for the help!


Charges virtually all 1- to 8-cell Ni-Cd and Ni-MH battery packs and 1- to 3-cell Li-Po battery packs
Adjustable charge rates from 0.1A to 5A for Ni-Cd and Ni-MH battery packs
Adjustable charge rates from 0.1A to 2.5A for Li-Po battery packs
Multi-function LCD shows charge time, current and voltage
Input and output circuit protection
Automatic trickle charge

Type:Peak/Voltage Detection <LI style="TEXT-ALIGN: left">Input:AC/DC
# Cells:1-8
Peak:yes
Current Discharge:none
Charge Rate:.1-5amps
Trickle Charge Rate:pulse
Input Connector:AC- plug DC-alligator clips
Output Connector:Tamiya
Battery Type:NiCd, MiMH, LiPO
Cooling Method:Fan
Voltmeter:Yes
Amp Meter:Yes
LCD:Yes
Discharge:no
LED:Yes
Dimensions (WxLxH):7"x4.75"x2.75"
Overload Protection:Yes

I have that charger works ok but if I were you I would buy this.
http://holmeshobbies.com/product.php...5&cat=7&page=1

If you on a budget you could try one of these http://www3.towerhobbies.com/cgi-bin...?&I=LXTCK1&P=7 but I would definitely get as much charger as you can possibly afford, you wont regret it and your batteries will like you more.

X2 "thumbsup" the built in balancer will save you about $30

X3,482

MUCH better charger IMO. Built in balancer and allot more options. Your batteries will thank you."thumbsup"

AND....... you would be SUPPORTING a great RCC vendor. ;-)

Thanks for all the replies. It's allways good to here from others "thumbsup"