my mm started getting hot all of a sudden
 

my mamba has started to get so hot it thermals and shuts down with minimal driving. it has always been wired the same, i have a 1500 3s lipo,powering the mamba,and a cc bec wired to the servo only, the bec in the mamba powers the rx and the dig servo. im running a 55 turn v 11 integy motor and 14/87 gearing. it has been working great no mater how hard i was driving her but all of a sudden it is having this problem. trying to figure out what i need to do. any help would be appreciated.

it is wired just like post 39 of this thread
http://www.rccrawler.com/forum/showt...=116914&page=2