| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
08-18-2004, 03:18 PM
| #1 |
| Newbie Join Date: Jul 2004
Posts: 16
|  Part # for 1/4 scale servo saver or arm I got a used Tower Hobbies 1/4 scale servo (the one with 343 oz/in. torque) but I need a servo saver or an arm for it. Can someone please post a part number and where to get one from. Thanks!!! |
|  |
| Sponsored Links | |
| | |
|
08-18-2004, 06:12 PM
| #2 |
| Pebble Pounder Join Date: Aug 2004 Location: Moab
Posts: 173
| Re: Part # for 1/4 scale servo saver or arm I've got one of those, i'm only using the X arm, pm me your addy and i'll drop the others in the mail to ya. |
|
| |
|
08-18-2004, 08:12 PM
| #3 |
| Newbie Join Date: Jul 2004
Posts: 16
| Re: Part # for 1/4 scale servo saver or arm Cutter, Thank you very much!!!!! Will be sending you a PM in a couple minutes. Thanks again!! 8O |
|
| |
|
08-19-2004, 12:14 AM
| #4 |
| Pebble Pounder Join Date: Aug 2004 Location: Moab
Posts: 173
| Re: Part # for 1/4 scale servo saver or arm I've PM'd ya back. Been working on my junk getting ready for the Moab event. BTW, whats the servo going in? Mines in my Mad Force and to get the room I had to move the gas tank to the back and I moved the receiver pack to the front beside the servo hoping that I can get more weight on the front. I'm stuffing the wheels with BB's to help it. |
|
| |
|
08-19-2004, 02:03 PM
| #5 |
| Newbie Join Date: Jul 2004
Posts: 16
| Re: Part # for 1/4 scale servo saver or arm Mine will be going on my crawler clod. Still trying to figure out how to work the steering. With the servo arm I will be able to figure out how far to mount it away from the diff. Also got a cable steering idea floating around in my head, so we'll see which one gets fabbed first.  |
|
| |
|
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
