|
| LinkBack | Thread Tools | Display Modes |
01-08-2009, 11:31 AM | #1 |
RCC Addict Join Date: Jul 2008 Location: Fox Valley WI
Posts: 1,691
| Metal trans gears=glitching?
I've had some problems using the Stampede trans with metal gears. The transmission was in several different rigs, and no matter how I mounted the electronics or routed the wiring it glitched like a MOFO (undriveable). I changed the rx, servo, everything...same results. I even swapped out the brushless motor/esc, and the same problem continued. The only common denominator was the trans. Is there a specific grease or lube I could use to eliminate the electrical "noise" generated by the metal to metal contact of the gears? Anyone else come across this problem? Thanks, T.D. |
Sponsored Links | |
01-09-2009, 03:24 AM | #2 |
Quarry Creeper Join Date: Jul 2005 Location: pleasant ridge
Posts: 317
|
have you tried a good automotive type wheel bearing grease?thats what i use i my steel geared clod. never had a glitch problem.
|
01-09-2009, 09:02 AM | #3 |
RCC Addict Join Date: Jul 2008 Location: Fox Valley WI
Posts: 1,691
|
That might have been a mistake on my part, I didn't use anything on the gears. Thanks, I'll have to open her up and try some lube. T.D. |
01-09-2009, 11:51 AM | #4 |
Rock Crawler Join Date: Apr 2008 Location: Lexington
Posts: 707
| |
01-09-2009, 11:59 AM | #5 |
RCC Addict Join Date: Jul 2008 Location: Fox Valley WI
Posts: 1,691
|
Hehehe, well? I did kinda ask for it, didn't I? Thanks, T.D. |
Thread Tools | |
Display Modes | |
| |