RCCrawler Forums

Greatscott · 01-10-2009, 08:38 PM

I have an AX10, my equipment was:
TQ3 TX/RX
Rooster Crawler ESC
65T Integy Motor
--> Had full speed fwd and rvs

I have replaced the TQ3 with a 3PM
--> Now I have only about 3/4 speed fwd and about 1/4 speed rvs. Everything on the radio is set to 100% or 0, what am I missing? What can I do to coreect this?

khj94704 · 01-10-2009, 08:43 PM

have you reprogrammed the esc yet?

Greatscott · 01-10-2009, 09:23 PM

No

I was thinking that it was something in the radio that was causing the problem, likey the ESC?

01-10-2009, 08:38 PM	#1
Greatscott I wanna be Dave Join Date: Jul 2005 Location: North Idaho Posts: 3,648	ESC Problem or TX/RX Problem? I have an AX10, my equipment was: TQ3 TX/RX Rooster Crawler ESC 65T Integy Motor --> Had full speed fwd and rvs I have replaced the TQ3 with a 3PM --> Now I have only about 3/4 speed fwd and about 1/4 speed rvs. Everything on the radio is set to 100% or 0, what am I missing? What can I do to coreect this?

01-10-2009, 08:43 PM	#2
khj94704 Pebble Pounder Join Date: Dec 2008 Location: California Posts: 195	have you reprogrammed the esc yet?

01-10-2009, 09:23 PM	#3
Greatscott I wanna be Dave Join Date: Jul 2005 Location: North Idaho Posts: 3,648	No I was thinking that it was something in the radio that was causing the problem, likey the ESC?

Sponsored Links

RCCrawler Forums

Thread: ESC Problem or TX/RX Problem?