what else needed?

[ugly_giddy]

hi guys!

i just got my MRC a fes days ago and im thinking of upgrading. id been reading about which electronics upgrade to go and i ended up going for this....

https://www.tcscrawlers.com/Tekin-FX...6-p-17307.html

but b4 ill get this i want to make sure that all etronics that ill be getting will be compatible with each other or at least with the motor and esc.

for the sevo i like this hitec:

http://www.hitecrcd.com/servos/show?name=HS-645MG

but with the bec and batteries i dont know what to get. what i mean is im not sure about the voltages and whether its compatible with the items above.

a little advice will help.

one more thing, can i still use the stock tx and rx with the upgrade. im thinking og getting the tx and rx last. just a tight budget.

thanks a lot!
more power to all!

[Failedabortion]

That esc will work, but that motor wont unless your running an axial/rc4wd tranny in your mrc for a 540 motor. That servo works great, I run one on my mrc also.

Either a tekin FXR or tekin b1R and a HH mini torquemaster.

CC bec works

FXR
http://holmeshobbies.com/product.php...0&cat=2&page=1
B1R
http://holmeshobbies.com/product.php...1&cat=2&page=1
HH torquemaster mini
http://holmeshobbies.com/product.php...&cat=17&page=1

[ugly_giddy]

Originally Posted by Failedabortion

That esc will work, but that motor wont unless your running an axial/rc4wd tranny in your mrc for a 540 motor. That servo works great, I run one on my mrc also.

Either a tekin FXR or tekin b1R and a HH mini torquemaster.

CC bec works

FXR
http://holmeshobbies.com/product.php...0&cat=2&page=1
B1R
http://holmeshobbies.com/product.php...1&cat=2&page=1
HH torquemaster mini
http://holmeshobbies.com/product.php...&cat=17&page=1

thanks for ur help!

im considering the HH mini torquemaster and the b1r. its a good chance ill go for these 2. provided its in stock.

now the question is battery. ill go lipo's but how do you pick ur battery? i mean do u look at just the volts or something? and what bec is compatible for these? do i need bec in the first place?

[Failedabortion]

With the b1R I would run a bec, could probably get away without one if you use the fxr. The Castle creations bec should work fine with it.

My personal setup in my mrc is a sidewinder micro, cc bec with a 645mg servo.

For lipo's it depends on where you want to mount it, The 600mah losi pack looks really tempting except the price tag...

[ugly_giddy]

how would u know what battery to get that would not burnt out ur lets say esc,servo...? do look at just the voltage?

tnx?