|
| LinkBack | Thread Tools | Display Modes |
04-27-2009, 06:32 PM | #1 |
Quarry Creeper Join Date: Feb 2009 Location: In my house
Posts: 243
| Crawlmaster run times, and tuning tips needed
Just put in a HH Crawlmaster 1000kv in place of my Tekin 55T. AX 10, 5.9lbs, HB Rovers. Mamba Max, lowest timing, punch control disabled. 14T Pinion, 87T Spur. 12 cell Elite 1500's Just looking for any tips on tuning this set up, (1st brush-less) and what I can expect for run times. Thanks in advance. |
Sponsored Links | |
04-27-2009, 08:46 PM | #2 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
|
gear it low and slow, and your runtimes will be pretty long. Should be in line with the 55t depending on how you drive. If you crawl around it will be nice and long, but if you start hammering down you could whittle it to 15 or 20 minutes. Everything else sounds good. Just make sure it isn't rubbing the tranny case. |
04-27-2009, 09:02 PM | #3 |
Quarry Creeper Join Date: Feb 2009 Location: In my house
Posts: 243
|
Thanks John The torque on this thing is INSANE! |
Thread Tools | |
Display Modes | |
| |