RCCrawler Forums - Spektrum dx3r aux channel,help!!!!

RCCrawler Forums (http://www.rccrawler.com/forum/)

- Electronics (http://www.rccrawler.com/forum/electronics/)

- - Spektrum dx3r aux channel,help!!!! (http://www.rccrawler.com/forum/electronics/182401-spektrum-dx3r-aux-channel-help.html)

lgnitro

06-06-2009 07:29 AM

Spektrum dx3r aux channel,help!!!!

I can't get my auxillary channel to work my digital mini servo on my dig. I have a new LOSI 1/10 crawler,and I get figure out how to get the switch to activate the third channel. PLEASE HELP A BROTHER!!!!

airranger

06-06-2009 10:08 PM

try not using blue lettering so we can read it..........

letus

06-06-2009 11:59 PM

Quote:

Originally Posted by lgnitro (Post 1832512)

You need to assign one of the 3-position switches (say 'E') and assign it to be Aux 3P (for Aux channel 3 position). Then just set you center and end points, you're good to go.

activethunderrc

06-07-2009 12:15 AM

Send bob1961 a pm and he can walk you thru it or you can call him - i know he just set all his stuff up for his crawler - he also has the same raido -
he helped me with all my electronics - great gut to work with

mann0mann

06-07-2009 12:31 AM

Quote:

Originally Posted by letus (Post 1833628)

You need to assign one of the 3-position switches (say 'E') and assign it to be Aux 3P (for Aux channel 3 position). Then just set you center and end points, you're good to go.

And to add a little further help.

Get out your manual. Go to page 29.

It will explain how to get to these settings.

All times are GMT -6. The time now is 03:59 AM.