RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Electronics (http://www.rccrawler.com/forum/electronics/)
-   -   Novak M2 Dig ESC Combo (http://www.rccrawler.com/forum/electronics/203992-novak-m2-dig-esc-combo.html)

Rockcrawler 11-10-2009 04:12 PM

Quote:

Originally Posted by EeePee (Post 2095283)
5 amps according to them. Which powers my 423 ounce servo and dig servo just fine with out any outboard help.

Granted it's with a 2S and 13.5 motor, but still. No problems.


Put a 3s or 4s on it and see what happens. :mrgreen:

They usually don't have a problem until you put it on 3s.

EeePee 11-10-2009 04:16 PM

Yeah yeah. Though I have run my Losi with the 13.5 for a few and it was okay, I don't know how it would really go down when I needed the power. I think we can imagine. But I picked the motor accordingly so I didn't have to run extra boxes.

spgrading 11-10-2009 10:10 PM

this may be a dumb question but will the novak moa dual motor and esc work with my punk rc dig

BigB_117 11-10-2009 10:43 PM

Quote:

Originally Posted by spgrading (Post 2096187)
this may be a dumb question but will the novak moa dual motor and esc work with my punk rc dig

It would replace it. It's basically an ESC with a punk dig type switch built into it. As well as the power biasing functioning.

Fishmaxx 11-12-2009 05:06 PM

Quote:

Originally Posted by msps003 (Post 2085662)
Novak Two did say here they were testing for 3S...

http://www.rccrawler.com/forum/showp...7&postcount=25



Quote:

Originally Posted by Bob Novak (Post 2099529)
We do have new products called the M2-Dig (3S compatible) and two new racing ESC's that we are planning to release shortly and more to follow including more crawling ESC's that will use our new Novalink software. It may sound like we are late coming to the party with the computer interface but we really aren't. In 1997 we were the first to introduce the Data Link Software which allowed you to change all the parameters in our speed controls via computer. Later that year we introduced the Pit Wizard which was the first hand held device that could change the parameters of the ESC's. I guess we were way ahead of our time as neither of these products was successful even though we spent a lot of time and money developing them.
Bob Novak

"thumbsup" Thanks Bob

pup 11-12-2009 06:14 PM

Fish, Where did that quote come from?

If will handle 3s I WILL be ordering as soon as possible."thumbsup"

EeePee 11-12-2009 06:18 PM

Came from the big long Novak thread. You can click that little blue box after Bob Novak in the quote.

pup 11-12-2009 06:21 PM

Thanks EEEEEPEEEEEE. I should have known about that little blue button. :oops:

EeePee 11-12-2009 06:24 PM

Yes, you should have.

Until next time, this is your chief meteorologist speaking on behalf of everyone here at RCC...

Mini 11-12-2009 09:43 PM

Once I see it on the website or on the specs that when I will order mine along with my BERG axles

megacabcummins 11-13-2009 09:11 AM

That's good to hear, but I am with Mini, until it is in writing on the web site it's not official.

megacabcummins 11-16-2009 12:14 PM

Is there a release date yet?

Mini 11-16-2009 12:28 PM

Quote:

Originally Posted by msps003 (Post 2107740)
Is there a release date yet?

X2"thumbsup"

DrtRacr440 11-16-2009 01:03 PM

How does the biasing work?Could i program as two of my five positions for third channel?Work based on input voltage of third channel or need seperate channels or channel mixing?Could i set five third channel epa's like so....rear dig-rear biased-full 4wd-front biased-front dig.....?Dont think my ex5-ur has a linear third option and has no mixing...

NovakTwo 11-16-2009 07:06 PM

Forward your question to tech@teamnovak.com

Quote:

Originally Posted by DrtRacr440 (Post 2107811)
How does the biasing work?Could i program as two of my five positions for third channel?Work based on input voltage of third channel or need seperate channels or channel mixing?Could i set five third channel epa's like so....rear dig-rear biased-full 4wd-front biased-front dig.....?Dont think my ex5-ur has a linear third option and has no mixing...


NovakTwo 11-16-2009 07:11 PM

M2 Dig update;

We will be adding the 3S specification info to the website later this week. We are in the process of contacting our distributors to have them update any copy they may have posted with their M2 listings.

Shipping date will probably be end of next month; but each week we review all projects and I will post new info as available.

megacabcummins 11-17-2009 06:20 AM

Cool :) Xmas gift for me 8)8)

hagus 11-18-2009 05:04 AM

Will the m2 dig work with the new Spektrum dx3e

Mini 11-18-2009 08:11 AM

Quote:

Originally Posted by NovakTwo (Post 2108649)
M2 Dig update;

We will be adding the 3S specification info to the website later this week. We are in the process of contacting our distributors to have them update any copy they may have posted with their M2 listings.

Shipping date will probably be end of next month; but each week we review all projects and I will post new info as available.


AAAAAAHHHHHHH The sweet sound of progress "thumbsup"
One more thing to add to the X-mas list :mrgreen:

all show 11-18-2009 08:48 AM

this is all i am waiting for my build , it is hard to wait another month with a roller waiting for a speedo. but should definately be worth the wait especially if it is 3s capable.


All times are GMT -6. The time now is 02:23 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com