12-13-2009, 09:32 AM | #1 |
RCC Addict Join Date: Jul 2009 Location: Reno, Nv
Posts: 1,964
| Help with a TQ3
Do i need 2k pots or can i use the 1k pots from Radio Shack? I am not sure of the difference. I found a thread here where i guy used the 1k pots but others say you need 2k pots. Also, i there a way that i can run the stock red switch for front dig(That is the common one used where the back tires are locked and the front truns.....right?) and then have a 3 position switch for everything? |
Sponsored Links | |
12-13-2009, 09:34 AM | #2 |
RCC Addict Join Date: Oct 2008 Location: Plainfield, IL.
Posts: 1,297
|
I used 2k ohm pots on the one i did a while back..
|
12-13-2009, 11:18 AM | #3 |
Rock Crawler Join Date: Feb 2008 Location: UK
Posts: 818
|
People use 2K pots because they are easy to find. 1K pots will work for most mods. You could wire the red switch in parallel with the 3-position - just make sure you don't turn both switches on together. Not a problem if they are both set the same way, but could be a problem if they are set opposite ways with the pots turned down to zero. |
Thread Tools | |
Display Modes | |
| |