FX-R problems with DUal Motor
 

Are you guys having problems with your FX-R glitching with dual motors?

i'm running two 35 turn motors and the thing is damn near un drivable. its not bad at full throttle but at slow speed the ting will drive it self.

i've run the FX-R and this receiver before on a single motor truck with no problems.

Give Ty a call at Tekin 208 634-5559, he's a clawler.

Do ya have a bec?:?

yes castle BEC with 3S

i called Tekin and noone picked up the phone.

so i started moving some things around. i re routed my antenna wire and i moved the BEC and it seams to have improved about 50%

i will keep playing with things. i dont' waa buy a new radio since i have 3 receivers one for the rock crawler, one for the drifter and one for the slash.

What are your settings like on the FXR? It might be somethng simple. I'm running an RS on mine with dual 35's right now but we have a few guys locally that are running FXR's and 35's in their rigs with no problems. How is the capacitor on it? Is it still in good shape, not dented and banged around, still have good solder joints?

What radio? It might even be a setting in their that has been over looked.

Tekin does have glitch problems with am radios. :?