RCCrawler Forums

cj7-377 · 02-07-2010, 12:59 PM

I look in search cant find this one.
My DX3R has a problem it will not center throttle or steering.
On the monitor screen thay twitch the steering jumps left
and right .The throttle does the same. will not center. The
only change is i put a hs7955tg on the steering. I have reset
the parameters also still will not center.
The esc is a fxr. with a ccbec. Three cell lipo.

Thanks for any help.
Kenneth

DaViolentOne · 02-07-2010, 04:22 PM

The servo or ESC isn't going to make that happen... I fired up my DX3R to see if it would do the same... My #'s didn't set still, but, they only jumped off center +/- 2 max... It was some serious # jumps before the lines even moved...

Have you reset the radio? The DX3R has an "auto center" feature that's supposed to 0 in the wheel and trigger each time or something like that... Has the radio seen a lot of use in a dusty environment? Could be dirty pots...

Other than that, don't know... Maybe search Spektrums help section...

treday619 · 02-07-2010, 04:55 PM

I would recalibrate the radio to the ESC. I had an issue like that and once I recalibrated it to the ESC it went away. It was a MM with the DX3R

losiredcatcrawler · 04-16-2010, 10:06 PM

has anyone figured this out yet i have the same set up and same thing happening thanks

Charlie · 04-16-2010, 10:24 PM

I had a customer that had this same issue at our shop once.

There is a "master reset" someplace in the radio, I don't have mine in front of me so I don't know exactly where it is.

But that fixed the problem. Not sure what it does, but it took care of his "jitters" on the spot. Boss told me he's seen it a few times since the DX3R has been out. I want to say it's in the "System" screen, but I could be totally wrong.

02-07-2010, 12:59 PM	#1
cj7-377 Pebble Pounder Join Date: Mar 2009 Location: Dyersburg Posts: 146	Help DX3R Problem I look in search cant find this one. My DX3R has a problem it will not center throttle or steering. On the monitor screen thay twitch the steering jumps left and right .The throttle does the same. will not center. The only change is i put a hs7955tg on the steering. I have reset the parameters also still will not center. The esc is a fxr. with a ccbec. Three cell lipo. Thanks for any help. Kenneth Last edited by cj7-377; 02-07-2010 at 01:02 PM. Reason: 1

02-07-2010, 04:22 PM	#2
DaViolentOne Rock Crawler Join Date: May 2006 Location: Surrey, BC, Canada Posts: 870	The servo or ESC isn't going to make that happen... I fired up my DX3R to see if it would do the same... My #'s didn't set still, but, they only jumped off center +/- 2 max... It was some serious # jumps before the lines even moved... Have you reset the radio? The DX3R has an "auto center" feature that's supposed to 0 in the wheel and trigger each time or something like that... Has the radio seen a lot of use in a dusty environment? Could be dirty pots... Other than that, don't know... Maybe search Spektrums help section...

02-07-2010, 04:55 PM	#3
treday619 Rock Crawler Join Date: Jul 2008 Location: Chula Vista Posts: 971	I would recalibrate the radio to the ESC. I had an issue like that and once I recalibrated it to the ESC it went away. It was a MM with the DX3R

04-16-2010, 10:06 PM	#4
losiredcatcrawler Rock Stacker Join Date: Jan 2010 Location: bucks Posts: 67	has anyone figured this out yet i have the same set up and same thing happening thanks

04-16-2010, 10:24 PM	#5
Charlie Rock Crawler Join Date: Jul 2006 Location: Hobbywing Posts: 552	I had a customer that had this same issue at our shop once. There is a "master reset" someplace in the radio, I don't have mine in front of me so I don't know exactly where it is. But that fixed the problem. Not sure what it does, but it took care of his "jitters" on the spot. Boss told me he's seen it a few times since the DX3R has been out. I want to say it's in the "System" screen, but I could be totally wrong.

Sponsored Links

RCCrawler Forums

Thread: Help DX3R Problem