HH torque master question
 

will the hh torque master br-xl hold up to front and rear steer with hitec servos 5645-mg and will i have to add anything its on a ax10

I think two servos (or even one big one) is pushing the internal bec too hard but those aren't too powerful servos so ya may get by without a bec.

The internal BEC should have no problem running two 5645 servos, if you are using an 11.1V battery or less. "thumbsup"

The BR-XL in my 2.2 rock racer runs 4ws with a 5998 up front and a 5645 in the back, and I use an 11.1V battery.

im runnin a 11.1v 3cell lipo so if yall say im good ill go with it and see what happens