dual fxr wiring set up
 

I will be switching over from the dx3r to the 4pk soon, and I have looked through here and in the search section for a wiring diagram of dual fxrs, I remember seeing somewhere on here some diagrams of how to wire em up I also remember that in the post someone had a pic of how they wire them up. So I was wondering if someone could send me the link to the post or where I could find it.

Thanks and God Bless

try this..........http://www.rccrawler.com/forum/showp...postcount=1081 if this doesnt goet it....search harley's threads for something. he pimps the 4pk and the dual fxr's so he would be the first guy that comes to mind. good luck

thanks man that helps, but the thread I was thinking about had an actual pic of 2 fxrs parallel to each other and had the wireing looking nice, I think it was someone who was or is a vendor but I can't remember.

i am still thinking harley would be the one to look at. do advanced search by his name. or go to his profile and look there. gotta be there somewhere. good luck man,

I saved this off here a couple weeks ago. Can't remember what thread I seen it in. http://i904.photobucket.com/albums/a...l/2f1c10a9.jpg

Thats the way i set my xr-10 and it rocks

That is my old wiring diagram.

There are pictures of my rig in the XR10 Section.

Thanks harly, that helps out a lot"thumbsup", I been readin theough the 4pm tips n tricks to get somewhat familiar with what I am getting my self into, I have never been good at setting mixes on radios, but the thread will help tremendously, it takes a lot of the intimidation out of it. "thumbsup"

maybe this one? http://www.rccrawler.com/forum/showp...3&postcount=13

harley's thread is great, takes about 5 minutes to set your radio up.

Thanks guys, this is helping me get an idea of how I want to wire it all up, I any one else has some pics of there set ups please post em.

Harley, could you clear something up for me? Do you prefer to run your BEC to your RX or to your servo? I have seen and done it both ways. I really cant tell a difference. Your input please.

I run mine to the RX, just because it is easy and clean. You don't need any extra harnesses or anything like that, just plug it in and pull the red wires from the ESC plugs.

The Futaba RX traces are beefy enough to handle almost all 2.2's from my testing. In a super, one would probably want to run the power direct to the servo instead.

I run my BEC directly into the RX as well, when I am not using the TorqueMaster ESC. In that case I don't need an external BEC, but you could still consider the BEC being routed through the RX.