10-08-2010, 08:10 AM | #1 |
Rock Stacker Join Date: Jun 2010 Location: tooele
Posts: 81
| dx3.0 punk dig issues
alright guys so i just swapped over to a new chassis and now i cant get my dig to work only the green light is on, (on my dig) my transmitter may have got turned on and settings bumped out of wack what should all the setting on the transmitter be
Last edited by crawler_jake; 10-08-2010 at 08:34 AM. |
Sponsored Links | |
10-08-2010, 03:33 PM | #2 |
Rock Crawler Join Date: Feb 2009 Location: Surprise, Az
Posts: 848
|
Epa set to 100 on the third channel?
|
10-08-2010, 09:38 PM | #3 |
Rock Stacker Join Date: Jun 2010 Location: tooele
Posts: 81
|
yeah
|
10-09-2010, 12:15 AM | #4 |
Rock Crawler Join Date: Jan 2009 Location: Christchurch, New Zealand
Posts: 501
|
Hi Jake, If the radio has a framerate setting make sure it's set to either 11ms or 16ms. Cheers, Mike. |
10-09-2010, 07:01 AM | #5 |
Rock Crawler Join Date: Sep 2006 Location: Lititz
Posts: 787
|
make sure that your new installation did not push the rx wires against one of the solder pads for the switches.
|
10-09-2010, 07:45 AM | #6 |
Rock Stacker Join Date: Jun 2010 Location: tooele
Posts: 81
|
alright cool thanks guys i will take a look at those things and let you know thanks
|
10-10-2010, 01:10 AM | #7 |
Rock Stacker Join Date: Jun 2010 Location: tooele
Posts: 81
|
sorry guys pretty sure i was just being and IDIOT .... i had the dig and the b.e.c. mixed up going to the reciever thanks though
|
| |