|
| LinkBack | Thread Tools | Display Modes |
01-16-2011, 09:10 PM | #1 |
Newbie Join Date: Dec 2010 Location: Derby
Posts: 7
| Newbie with Scorpion Issues
I recieved a pieced together Axail Scorpion form a friend. I've replaced the transmission and the pinion gear. After putting it back together it does not run. when powered up the front steering servos will turn the wheels but nothing else. The ESC has power and the receiver has power but nothing gets to the motor. All suggestions welcome.
|
Sponsored Links | |
01-17-2011, 11:21 AM | #2 |
MODERATOR™ Join Date: Jul 2004 Location: Ohio
Posts: 18,928
|
Battery straight to the motor to see if the motor works.
|
01-17-2011, 11:46 AM | #3 |
RCC Addict Join Date: Jun 2005 Location: St. Albans
Posts: 1,441
|
Check to make sure you dont have a hung brush too. If the motor is used clean it and pull the brushes out to make sure the hoods are nice and clean so the brushes can move correctly without hanging up.
|
01-19-2011, 11:27 PM | #4 |
Newbie Join Date: Dec 2010 Location: Derby
Posts: 7
|
Thanks guys. After pulling my hair out, I let it sit for a day. Found a bad connection with wire going to rcvr. This thing rocks...
|
01-21-2011, 02:10 AM | #5 |
Newbie Join Date: Mar 2009 Location: woodbury
Posts: 38
|
how about some pics of this rig
|
01-21-2011, 06:57 PM | #6 |
Quarry Creeper Join Date: May 2009 Location: Under Communist Occupation
Posts: 271
|
general rule of thumb, the smaller the scorpion, the worse the sting!
|
Thread Tools | |
Display Modes | |
| |