Tech help turnigy 4x6s charger... JUST GOT THE TURNIGY 4X6S CHARGER THAT DOES UP TO 4 PACKS AT ONCE..I THINK IT HAS 50W PER PORT...MY POWER SUPPLY DOES 350W 14V 25A ... Can i charge 4x4S 5000mAh LIPOS at 5a or will my house burn down:shock:? THERE WAS NO MANUAL INCLUDED.... IM SO CONFUSED RIGHT NOW WITH ALL THESE AMPS AND VOLTS ,WATTS etc. here is a link http://www.hobbyking.com/hobbyking/s...dProduct=11170 thanks |
Quote:
I think you are going to find it will not let you charge 4 batts at 5 amps each. It says 6 amp per port but that doesn't mean all at once. Go ahead and hook it up with your batts and it will limit the charge rate I think. Chargers usually have a limit built in to the software. Let us know how it does OK? Randy |
The manual's there under the parts discription. Click on the files tab then on manual to get it. It's a pdf file. http://www.hobbyking.com/hobbyking/s...3X98688X54.pdf |
Quote:
Awesome....gonna read through this....thanks |
I think you should be fine. You are under the rated specs for the supply. The supply probably has some kind of protection built in. |
here ya go. It employs the circuit that features four totally independent but identical power outputs which are powered 50 watts each. Total powers are 200 watts. As a result , it can charge or discharge up to 4 x 15 cells of NiCd/NiMH or 4 x 6 series of Lithium batteries simultaneously, and maximum current of 6.0A. Furthermore the cooling system is so efficient that can hold such a power without any trouble of running the CPU or the operating program. |
Quote:
You'll be Ok, It'll warn you if it can't do it;-) |
I have one similar to it, it will simply adjust the amp down to about 3.2 amp charge rate. 2s is the only one where can use the full 6 amps. |
All times are GMT -6. The time now is 07:29 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com