2.4ghz tq3

[losikid]

Well i'm working on dual esc, proportional control for the TQ3. I don't have a 2
.4 ghz tq3 to look at. So what i would like to know is

Does the 2.4ghz traxxas TQ3 have a analog 3rd ch, or in other words can you do the 3 pos switch mod like on the am tq3's

There should be 3 wires... or a place for the additional wire on the circuit board

If yes than is it this way as well on the 4 ch radios (but were still talking the 3rd channel)