02-02-2011, 09:40 PM | #1 |
Quarry Creeper Join Date: Dec 2008 Location: Bend
Posts: 306
| sidewinder question
i set my sidewinder to auto lipo cutt-off... dont get but about 15 min of run time.. wanted to know if anyone know what the cut-off voltage in when in "auto-lipo cut-off mode" thinking in might be set to high and it is shutting down to early.... if i dont use "auto lipo cut=off and just set it to a specific voltage cutt-off... the lowest is 3v.. is that to low? running a bully 1/10 and the battery is a 2cell 1300 30c |
Sponsored Links | |
02-02-2011, 09:56 PM | #2 |
Quarry Creeper Join Date: Mar 2008 Location: N. Ridgeville , Ohio
Posts: 461
|
What steering servo and if you're running dig is it a punk dig or OG servo/switches also what motors are you using and what is your BEC set at?
|
02-02-2011, 10:03 PM | #3 | |
Quarry Creeper Join Date: Dec 2008 Location: Bend
Posts: 306
| Quote:
645 hitec servo rc4wd bec...dont think i can adjust it..says 5a on the top brushed 35 turn rc4wd motors the cheap ones | |
02-03-2011, 10:16 PM | #4 |
Quarry Creeper Join Date: Dec 2008 Location: Bend
Posts: 306
|
only 18 min. today... does that seem right? |
02-03-2011, 11:08 PM | #5 |
Newbie Join Date: Jan 2011 Location: canada
Posts: 26
| |
02-06-2011, 12:08 PM | #6 |
Rock Crawler Join Date: Jul 2009 Location: greeley
Posts: 545
| If you don't have a meter to check the voltage or a charger with a meter in it. A good way to gauge it is it should take an hour or so to charge at 1 "C". If you have a meter the run time voltage I use is about 7.0 volts |
02-06-2011, 12:12 PM | #7 |
cherry bomb Join Date: Jul 2006 Location: Nanaimo, BC, Canada
Posts: 1,598
|
your 18min or so of run time is about right, my XR10 with 2 micro sidewinders running 1300mah 2s packs has 15-20min at best of run time, sounds like you need yo buy a couple more packs, I have 4 for each of my crawlers.
|
Thread Tools | |
Display Modes | |
| |