RCCrawler Forums

Thurzday · 03-09-2011, 01:32 AM

I need some assistance finding armatures for 540 brushed motors. I have been searching the internet hobby shops and local shops for the last few days to no avail for the higher turn armatures 35t,45t etc. It's either the whole motor or nothing. I don't care if it's machine or hand. I have numerous 540 cans and an old lathe. Anyone got any suggestions?

EddieO · 03-09-2011, 02:24 AM

I sell them...

www.teambrood.com or pm me

Later EddieO

losikid · 03-09-2011, 08:04 AM

Homes Hobbies also sells his pro arms, and his crawlmasters too i think,

here you go

http://holmeshobbies.com/product.php...&cat=23&page=1

Thurzday · 03-09-2011, 11:02 AM

Thank you guys I had been to Holmes Hobbies site a few times and couldn't find the Armatures. Maybe I was too tired or out of it

. I recently picked up a parts lot of motors for cheep, waiting to see what I got before I order any thing. I do have a couple older modified motors that are used up, but the cans are good both have 5.0 wet magnets. I have a Creeper with a 45t and A custom scaler with an Axial drive train. Any suggestions on number of winding?

JohnRobHolmes · 03-09-2011, 11:04 AM

Between 45 and 35t is certainly the most popular. Got a battery voltage planned? Sounds like you are setting yourself up for some motor rebuilding!

Thurzday · 03-09-2011, 01:23 PM

I have 2s 40c lipos and 7.2v nimh that I use. I have a lot of free time as there is no work here for me. I've been doin a lot of searching threads lately. I'm slowly getting back in to motor tuning.

JohnRobHolmes · 03-09-2011, 02:30 PM

35t would have better pep and power, for sure.

03-09-2011, 01:32 AM	#1
Thurzday Newbie Join Date: Feb 2009 Location: Sacramento Posts: 37	Armatures I need some assistance finding armatures for 540 brushed motors. I have been searching the internet hobby shops and local shops for the last few days to no avail for the higher turn armatures 35t,45t etc. It's either the whole motor or nothing. I don't care if it's machine or hand. I have numerous 540 cans and an old lathe. Anyone got any suggestions?

03-09-2011, 11:02 AM	#4
Thurzday Newbie Join Date: Feb 2009 Location: Sacramento Posts: 37	Thank you guys I had been to Holmes Hobbies site a few times and couldn't find the Armatures. Maybe I was too tired or out of it. I recently picked up a parts lot of motors for cheep, waiting to see what I got before I order any thing. I do have a couple older modified motors that are used up, but the cans are good both have 5.0 wet magnets. I have a Creeper with a 45t and A custom scaler with an Axial drive train. Any suggestions on number of winding? Last edited by Thurzday; 03-09-2011 at 11:07 AM.

03-09-2011, 02:24 AM	#2
EddieO I wanna be Dave Join Date: Apr 2007 Location: Arlington, Washington Posts: 2,303	I sell them... www.teambrood.com or pm me Later EddieO

03-09-2011, 08:04 AM	#3
losikid Got Worms? Join Date: Jun 2009 Location: Golden, CO Posts: 6,116	Homes Hobbies also sells his pro arms, and his crawlmasters too i think, here you go http://holmeshobbies.com/product.php...&cat=23&page=1

03-09-2011, 11:04 AM	#5
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	Between 45 and 35t is certainly the most popular. Got a battery voltage planned? Sounds like you are setting yourself up for some motor rebuilding!

03-09-2011, 01:23 PM	#6
Thurzday Newbie Join Date: Feb 2009 Location: Sacramento Posts: 37	I have 2s 40c lipos and 7.2v nimh that I use. I have a lot of free time as there is no work here for me. I've been doin a lot of searching threads lately. I'm slowly getting back in to motor tuning.

03-09-2011, 02:30 PM	#7
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	35t would have better pep and power, for sure.

Sponsored Links

RCCrawler Forums

Thread: Armatures