jr servo help ive got a jr 126 servo with metal gears baught it like 2 weeks ago and now it doesnt work. i baught it for my scx-10 but ended up putting it in my rustler and ive only used it like 4 times since i put it in. dont know what to do. ive never had this happen with a servo this new |
anyone |
Cant really begin to help you with so little info. by "not working" what do you mean? |
i ran it a couple times in my rustler worked perfect went out yesterday to play with it and the servo wouldn't work. it wouldn't turn or even make any noises so i took it out and tried to turn the horn manually and it still wouldn't move so i opened up the case to see if it was a gear problem and no gear jams plugged it in to try again and it went up in smoke |
no one knows??????/ |
If it went up in smoke it's done for. Get a Hitec or Futaba. "thumbsup" |
Sounds like the motor was toast before you took it apart. when you get a new one, make sure you dont have any binding, and adjust your EPS's accordingly. Back in the old DNA dig days, i didnt set my epas correctly, and watched a HT 645mg, Literally catch fire. Glassman made fun of me. |
Quote:
|
ive got a dx2s setup and the first thing i did was adjust the epa so i wasnt binding the gear set but i have never had a servo burn up like that on like the 4th or 5th run |
Quote:
|
yea and no help from them they wont warranty it because it started smoking they said it was my fault but they are more than happy to sell me a direct replacement. |
JR is a great company, especially when it comes to warranty. They, as I, probably have a hard time believing that after it was taken apart, it burned up by itself. Send them an email, and re-word what happened.... |
wow does it really take almost 7 hours to get a hold of the manufacture. my local hobby shop wont do anything but send it in for me but i have to get them to send a tag to the hobbyshop first anyone else have this problem with this |
email them/horizon hobby. you will get a response in 1-3 days. But keep in mind, that they will most likely assume that you plugged it in incorrectly, freaked and took it apart, and then the reassembly is what smoked it. write them an email, it has a 3yr warranty if you bought it new. |
i baught it new from hobby town in kalamazoo michigan but i dont have the original recippt but the hobby shop guy knows me on a first name basis and he has been more help than the dam horizon hobbies has so i think im just gonna give up on it throw the crap away and go get me a hitec servo. i have never had a prob with those ones. i have a 645mg that i have had on 5 cars in 3 years and still works like brand new |
either way, you now have an excuse to buy an actually adequate servo. |
what would be a good servo for a scx-10 stock running gear with an xl5 esc with lvc and a dx2s tx with sr300 rx for cheap less than $60 |
Good & cheap are usually mutually exclusive words in a single sentence.:roll: If you really want to do this hobby, get a decent/good servo and be happy. Otherwise, be prepared to smoke a few along the way. In racing, we used to say, "Good, Fast, cheap.......pick any 2........"8) |
well what is a good servo to run that i can submerge in water and mud doing trail running and every once in a while rock crawl with running the equiptment i have now and have no worrys about toasting it soon but not break the bank |
Try them!! http://www.amainhobbies.com/product_...a-Torque-Servo ^click here to check out servo! This is a good servo i bought from http://www.amainhobbies.com its def. not water proof but a good servo and amain has great customer service.. After i purchased it i ran it like 3 times maybe like 1 hour and a half and when i went to run my XR10 again it binded up real bad when the steering was all the way one way or when it was under pressure so i contacted amain via email and they gave me great customer service!!!! i just sent them the servo back and they are sending me another one!!! But i know you wanna sink it in water so shoot them a email and ask them that question i bet they would help you!! Amainhobbies.com "thumbsup" Great Customer service!!!!"thumbsup" |
All times are GMT -6. The time now is 01:15 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com