04-30-2011, 12:28 PM | #1 |
Rock Stacker Join Date: Nov 2009 Location: ft waste
Posts: 54
| FXR and FXR pro
whats the difference between these two esc's i cant seem to find any differences in the specs |
Sponsored Links | |
04-30-2011, 12:55 PM | #2 |
RCC Addict Join Date: Oct 2008 Location: Tyler, TX
Posts: 1,619
|
The pro has more power handling as it uses double the mosfet's.
|
04-30-2011, 04:47 PM | #3 |
Rock Stacker Join Date: Nov 2009 Location: ft waste
Posts: 54
|
so is it worth $25 difference in price? i need 2 so that would be $50
|
04-30-2011, 10:16 PM | #4 |
RCC Addict Join Date: May 2008 Location: Chicago/Bloomington
Posts: 1,505
|
That will depend on the motors you use. I'm using two Tekin FX-Rs with two Tekin 55T motors on 3S lipo with a CC BEC. No problems. Now if I wanted to use a 10T modified motor it may cause a problem. The Pro is made for low wind motors. However, both the FX-R and the Pro on 3S are recommended to use 35T and higher winds. On 2s the FX-R has a 13T limit whereas the Pro has no motor limit. |
04-30-2011, 10:21 PM | #5 |
Pebble Pounder Join Date: Oct 2010 Location: australia
Posts: 121
|
i thought if you had a fxr you could only run 2s and the fxr pro was 3s |
05-01-2011, 01:58 AM | #6 |
Rock Crawler Join Date: Jul 2009 Location: Little Rock, Arkansas
Posts: 542
| |
05-01-2011, 06:40 AM | #7 |
RCC Addict Join Date: Oct 2008 Location: Tyler, TX
Posts: 1,619
| |
05-01-2011, 09:28 AM | #8 |
Rock Stacker Join Date: Nov 2009 Location: ft waste
Posts: 54
|
yes these would go in an xr10
|
05-03-2011, 03:08 PM | #9 |
Rock Stacker Join Date: Nov 2009 Location: ft waste
Posts: 54
|
can one fxr run 2 35t motors? till i can get a second one
|
05-03-2011, 06:15 PM | #10 |
Quarry Creeper Join Date: May 2009 Location: brentwood
Posts: 324
| |
Thread Tools | |
Display Modes | |
| |