|
| LinkBack | Thread Tools | Display Modes |
05-17-2011, 06:56 PM | #1 |
Newbie Join Date: Nov 2010 Location: St Louis
Posts: 42
| Shortening wires on esc and bec
Shortening the wires on my 2 x fxr's and bec to the receiver cause any problem other then being to short for other installs on other things. like to do it so not to have to wrap them up and to make crawler lighter.
|
Sponsored Links | |
05-17-2011, 07:15 PM | #2 |
Rock Crawler Join Date: Jan 2006 Location: PNW!!!
Posts: 747
|
You can cut them or coil them. I'd coil them so that you are able to use them on other projects. Here are some example; Wiring on my super And my 2.2 |
05-17-2011, 07:36 PM | #3 |
Newbie Join Date: Apr 2011 Location: Rabble
Posts: 34
|
How did you get your wires to coil like that? Looks very nice.
|
05-17-2011, 09:43 PM | #4 |
I wanna be Dave Join Date: Mar 2008 Location: Wayne county. PA
Posts: 2,507
|
every body just wraps them around a screw driver to get that telephone coil, that's old school .........bob .... |
05-17-2011, 09:53 PM | #5 |
Shelf queen Join Date: Aug 2008 Location: Internet
Posts: 5,857
| |
05-23-2011, 01:57 PM | #6 |
Rock Crawler Join Date: Feb 2006 Location: sunny acres
Posts: 621
|
After coiling them I like to shrink some heat shrink tubing over them. It keeps them from uncoiling and neatens up the install. Simply pull the wire out and cut off the heatshrink when you're ready for another install.
|
05-26-2011, 01:30 PM | #7 |
Rock Stacker Join Date: Jan 2011 Location: Yakima
Posts: 59
|
Coil is the best way to go, I do all of mine like that. never thought about heat shrink....good idea.
|
Thread Tools | |
Display Modes | |
| |