BRXL help Trying to calibrate my esc to my DX3E. I have tried doing over and over and I just cant seem to get it to work. Help me before I just sell it off. |
Maybe you can try flipping the throttle reverse switch from its current position to the other (on top of your DX3E) and see if that helps. |
Might be doa. Happened to me. John took good care of me considering it was only a few days before a national event. |
Quote:
My first one was DOA. I wouldn't think I would get 2 that way. I will try the rev switch. |
E-mail John, I had 2 that had issues. He took care of me quite quickly. Best customer service anywhere! |
I would hope I don't have that bad of luck to get two bad one's. If anyone thinks that they might be able to walk me through it, you can give me a call. Thanks Brandon 828-835-6706 |
Stupid question....is the throttle trim set to "0", EPA's set to 100%.....have you tried with throttle deadband, switching the throttle to reverse (should be "normal" usually)?? |
Quote:
Check on all of them expect the "throttle deadband" |
Ok a little progress. I can control the throttle now, but as soon as I even touch the trigger it jumps into wide open full throttle forward. Only way to stop it is to press the trigger into the reverse operation. |
Quote:
|
Quote:
|
Quote:
How dose your radio do on your kids ESC? |
Quote:
Same problem as with the BR-XL. I wonder how hard it is to fix the throttle trigger on a DX3E:evil: |
just send it back to get it looked at. dont open it and discover you just did more damage. |
All times are GMT -6. The time now is 04:33 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com