GT3B Hack Question and Answer Thread

[DrDiff952]

I got my 4WS working!

O.P.A.T. 4X4X4 Wraith - YouTube

[arevir]

Originally Posted by losikid

The switches I posted above makes it ALOT easier to move the switches

Are they just drop in, I mean no soldering required.

I have 2 GT3C.

[losikid]

Originally Posted by arevir

Are they just drop in, I mean no soldering required.

I have 2 GT3C.

Yea, just drop in. Although you gotta take some screws out and put them back in, but if that's an issue then you're in the wrong hobby

[JokersWild]

Originally Posted by losikid

Yea, just drop in. Although you gotta take some screws out and put them back in, but if that's an issue then you're in the wrong hobby

X2........ Easy for me but not for faint of heart, lol

Austin send my request, lol.

[indyrubi]

got one of these ordered up.... cant wait to get it.

[mark32]

cant remember how to get into the calibration screen.can any body help forgot to change my battery voltage.

[mark32]

Nobody

[heyok]

Originally Posted by mark32

cant remember how to get into the calibration screen.can any body help forgot to change my battery voltage.

Originally Posted by mark32

Nobody

This is a link to post 3266
Hopefully it is about the same firmware that you are using.

GT3B Hack Question and Answer Thread

[Richterat83]

Anybody know where i can get just the 4 port header that gets soldered to the board? I already have the hack kit and adapter, but i'm looking to pick up another radio (as well as mod one for mudbeast)

Thanks in advance!

[DrDiff952]

The same place that you got the adapter.... OverKillrc.com

[Richterat83]

he only sells adapters for $1 or a combo for $5. I don't need adapters, i only need the 4 pin port which he doesn't sell alone

[DrDiff952]

Look at the gt3c section. That is where you will find it

[Richterat83]

He sells the male to male part individually, but not the male to female. I only need to male to female connector.

[Nils1976]

Hello Everyone!

I wanted to do a video tutorial of how to hack a GT3B for a long time. Finally I have managed to do it, so here's my little video tutorial.
I really hope you will like it and I also hope that this will help out a little bit!

Please enjoy and thanks for watching!

RC-Films: FlySky GT3B Firmware Tutorial (English) - YouTube

[jaymann]

Is there any where to get replacement rocker switches (like the ones losi kid was working on)I broke a tab off one of mine.


Sent using lipo power

[novarider]

I want to run a winch from my tx. If I purchase this radio and hack it do I still need a controller for the winch or will the radio be able to control it by itself if I hook the winch directly to the rx?

[jaymann]

Originally Posted by jaymann

Is there any where to get replacement rocker switches (like the ones losi kid was working on)I broke a tab off one of mine.


Sent using lipo power

Never mind ordered a couple from the site.glad you made these.anyone else have theirs break.both mine are done now.


Sent using lipo power

[JokersWild]

Originally Posted by novarider

I want to run a winch from my tx. If I purchase this radio and hack it do I still need a controller for the winch or will the radio be able to control it by itself if I hook the winch directly to the rx?

Yes all winches with any tx need a winch controller.

[JokersWild]

Originally Posted by jaymann

Never mind ordered a couple from the site.glad you made these.anyone else have theirs break.both mine are done now.


Sent using lipo power

Nope, had my personal radio now for well over 3 years... May be 5? I can't remember..... But no broken switches.

[jaymann]

Originally Posted by JokersWild

Nope, had my personal radio now for well over 3 years... May be 5? I can't remember..... But no broken switches.

Maybe I'm a bit heavy handed.lol
The hi profile switches look easier to use as well,added bonus for me.



Sent using lipo power