| |
07-15-2011, 04:04 PM
| #1 |
| Newbie Join Date: May 2009 Location: scotland
Posts: 35
|  Novak M2
Hi dose any one know how to wire up the C C bec to the m2 with out any glitching problems.
|
|  |
| Sponsored Links | |
| | |
|
07-15-2011, 04:12 PM
| #2 |
| Rock Crawler Join Date: Jul 2006 Location: Hobbywing
Posts: 552
| csuangka@teamnovak.com Make sure you get the updated version, by emailing me your serial number. If you don't, I'll send you a brain board. After that, it wires up just like anything else. |
|
| |
|
07-15-2011, 04:55 PM
| #3 |
| I wanna be Dave Join Date: Jul 2005 Location: North Idaho
Posts: 3,648
|
Here is how I have mine wired:  I only get glitches when I have done work on my truck and have forgotten to make sure my RX antenna is routed properly. |
|
| |
|
07-15-2011, 08:12 PM
| #4 |
| Pebble Pounder Join Date: May 2011 Location: Spring
Posts: 117
|
Do you have the CC BEC with 1 or 2 leads? I had glitching issues until I was suggested to hook up the ground wire along with the signal wire to the RX from the CC BEC.
|
|
| |
|
07-16-2011, 07:38 AM
| #5 |
| Newbie Join Date: May 2009 Location: scotland
Posts: 35
|
Charlie you have all ready sent me brain boards over Greatscott thanks very much for the diagram I'm gona just go with that Rok krawl it's the bec with with one leeds off it Thanks gus for the input |
|
| |
 |
| |
Linear Mode
