|
| LinkBack | Thread Tools | Display Modes |
09-21-2011, 12:56 AM | #1 |
Pebble Pounder Join Date: Jun 2011 Location: Central California, Pismo Beach/San Luis Obispo
Posts: 114
| Question about Spektrum SR300
I have some new electronics to put in and I'm making sure everything is going to work. Will i be able to run my 3racing winch, throttle, steering, and BEC into my Spektrum SR300?
|
Sponsored Links | |
09-21-2011, 03:01 AM | #2 |
Rock Crawler Join Date: May 2009 Location: Queensland, Australia
Posts: 610
|
yeah that will work no problems mate. Bec into Bind port, ESC into Thr port, Servo into Str port and Winch into Aux port. |
09-21-2011, 07:17 AM | #3 |
I wanna be Dave Join Date: May 2007 Location: Vancouver, BC
Posts: 2,376
|
That receiver will accept a little over 9 volts. If you have servos and a winch controller that can take it, you can get some good performance from them! This page shows the SR300 specs: http://www.spektrumrc.com/Products/D...rodID=SPMSR300 |
09-21-2011, 01:10 PM | #4 |
Pebble Pounder Join Date: Jun 2011 Location: Central California, Pismo Beach/San Luis Obispo
Posts: 114
|
Thanks @Wideload. I was a little thrown off with the bind port.
|
01-05-2012, 06:30 PM | #5 |
Newbie Join Date: Dec 2011 Location: Canada
Posts: 28
| Re: Question about Spektrum SR300
No the reciever is not compatible because the plug that connects to the reciever is not the right fit I'm sure you could use it if you file it down or change the plug!!! Hope it works for you
|
Thread Tools | |
Display Modes | |
| |