Go Back   RCCrawler Forums > RCCrawler General Tech > Electronics


Thread: Help Wiring up LED's

LinkBack Thread Tools Display Modes
Old 11-11-2011, 06:44 PM   #1
Rock Stacker
Join Date: Jun 2011
Location: Coquitlam
Posts: 58
Default Help Wiring up LED's

I have never done this stuff B4, I have no issue with soldering im quite good with electronics in general.... I guess my question is can I remove/modify the stock LED's in my wraith for some high powered Bright whites i can get at HomeDepot or some other joint..... Can I use the same light controller or must i get something else?

Thanks in advance
Elliott000 is offline   Reply With Quote
Sponsored Links
Old 11-11-2011, 06:57 PM   #2
I wanna be Dave
Join Date: Dec 2009
Location: San Francisco
Posts: 2,236

If the specs on the LED's are the same then it will work fine. I dont know how they do it, is the voltage controlled by the controller or is there a resistor wired on each LED? You have to figure that out first.
SMR 510RR is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -6. The time now is 02:47 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com