| |
12-03-2011, 07:23 PM
| #1 |
| Quarry Creeper Join Date: Oct 2011 Location: Shirley
Posts: 498
|  what are my options
im thinking about going with 4ws and dig on my losi shafty. i dont fully understand transmitters and receivers yet. would i have to have a transmitter with a 3 position switch for both the 3rd and 4th channel? im sure someone has already done this so any recommendations would be appreciated. Losikid, im guessing this is something your hacked gt3b is capable of, would you mind explaining it to me?
|
|  |
| Sponsored Links | |
| | |
|
12-03-2011, 08:58 PM
| #2 |
| I wanna be Dave  Join Date: Dec 2009 Location: San Francisco
Posts: 2,236
|
Hacked GT3B or Futaba 4pl/4pk/4pks With any of these you will be able to have mixing for 4ws to control it on/off, reverse it, and proportion it. Then you will have a 3pos switch for your dig. |
|
| |
|
12-03-2011, 09:27 PM
| #3 |
| I wanna be Dave Join Date: Feb 2007 Location: South FL
Posts: 3,349
|
Get a hacked GT3B from Losikid. I picked up a programmer and a pair of high efficiency voltage regulators with wheel bearings for both my GT3Bs and couldn't be happier. It does more than you need,receivers are cheap and he gives great support.
|
|
| |
|
12-04-2011, 11:21 AM
| #4 |
| Quarry Creeper Join Date: Oct 2011 Location: Shirley
Posts: 498
|
okay, and as for a receiver? any recommendations as to what works well with the gt3b?
|
|
| |
|
12-04-2011, 11:40 AM
| #5 |
| Rock Stacker Join Date: Apr 2011 Location: Central, KY
Posts: 57
|
A receiver is included with the fly sky radios. 3 channels plus batt.
|
|
| |
|
12-04-2011, 11:51 AM
| #6 |
| Quarry Creeper Join Date: Oct 2011 Location: Shirley
Posts: 498
|
awrite, thanks. ive been tryin to read up an figure most of this shit out myself but it gets a lil overwhelming. the answers are appreciated.
|
|
| |
|
12-04-2011, 12:51 PM
| #7 |
| Rock Crawler Join Date: Oct 2011 Location: smithville
Posts: 642
|
Just so you know you could get a 3 ch, BUT i would get a 6ch because it still works with the 3 ch rx it comes with and if you get a scaler they usually use a lot of channels so you will have the necessary amount of ch's.
|
|
| |
|
12-04-2011, 03:53 PM
| #8 | |
| Rock Stacker Join Date: Apr 2011 Location: Central, KY
Posts: 57
| Quote:
Is this the 6 ch rx you are talking about? | |
|
| |
|
12-04-2011, 06:46 PM
| #9 |
| I wanna be Dave Join Date: Feb 2007 Location: South FL
Posts: 3,349
|
6 channels only work if you have the radio hacked otherwise you can only use 3 channels.flysky, hobbyking, & eurgle version 2 rx's all work as well as the new axial 2.4 |
|
| |
 |
| |
Linear Mode
